1 Scope
This standard specifies the definition, classification, requirements, test methods and inspection rules of automotive electrical accelerator pedal module.
This standard is applicable to Classes M and N automotive electrical accelerator pedal modules, and also serves as reference for other automobiles.
2 Normative references
The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 19951-2005 Road vehicles - Test methods for electrical disturbances from electrostatic discharge
GB/T 28046.2-2011 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
GB/T 28046.3-2011 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads
GB/T 28046.4-2011 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads
GB/T 30038-2013 Road vehicles - Degrees of electrical equipment protection (IP-code)
GB/T 17619 Limits and methods of testing for immunity of electrical/electronic sub-assemblies in vehicles to electromagnetic radiation
QC/T 413-2002 Basic specifications for automotive electrical equipment
QC/T 788 Performance requirements and bench test methods of automobile pedal device
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, storage and preservation
