1 General Provisions
1.0.1 This code is formulated with a view to achieving safety and reliability, practicality, beautification, economy and rationality for metal and stone curtain wall engineering.
1.0.2 This code is applicable to the design, fabrication, installation and construction as well as acceptance of the following civil building metal and natural stone curtain wall (hereinafter referred to as "stone curtain wall") engineering:
1 Civil building metal curtain wall engineering with building height not larger than 150m;
2 Civil building stone curtain wall engineering with building height not larger than 100m and fortification intensity not larger than Intensity 8.
1.0.3 The overall process of design, fabrication, installation and construction of metal and stone curtain wall shall be subjected to quality control; the fabrication, installation and construction enterprise of metal and stone curtain wall engineering shall establish internal quality control criteria.
1.0.4 Materials, design, fabrication, installation and construction as well as acceptance of metal and stone curtain wall shall not only comply with this code, but also the requirements of the current relevant compulsory standards of the nation.
1 General Provisions
2 Terms and Symbols
2.1 Terms
2.2 Symbols
3 Materials
3.1 General Requirements
3.2 Stone
3.3 Metal Materials
3.4 Building Sealing Materials
3.5 Structural Silicone Sealant
4 Performance and Structure
4.1 General Requirements
4.2 Performance of Curtain Wall
4.3 Structure of Curtain Wall
4.4 Fire Protection and Lightning Protection Design of Curtain Wall
5 Structrual Design
5.1 General Requirements
5.2 Load and Action
5.3 Mechanical Properties of Curtain Wall Materials
5.4 Design of Metal Sheet
5.5 Design of Stone Slab
5.6 Beam Design
5.7 Design of Upright
5.8 Connection of Curtain Wall and Main Structure
6 Processing and Fabrication
6.1 General Requirements
6.2 Processing and Fabrication of Curtain Wall Member
6.3 Processing and Fabrication of Stone Slab
6.4 Processing and Fabrication of Metal Sheet
6.5 Inspection of Curtain Wall Member
7 Installation Construction
7.1 General Requirements
7.2 Preparation of Installation Construction
7.3 Curtain Wall Installation Construction
7.4 Protection and Washing of Curtain Wall
7.5 Installation Construction Safety of Curtain Wall
8 Engineering Acceptance
9 Maintenance and Service
Appendix A Design Value of Steel Structure Joint Strength
Appendix B Sheet Bending Moment Coefficient
Appendix C Design of Embedded Parts
Explanation of Wording in This Code
