1 Scope
This part of JB/T 8734 specifies the service characteristics, type and specification, technical requirements and testing of screened wires.
This part is applicable to copper-cored polyvinyl chloride insulated screened wires of AC rated voltage U0/U up to and including 300/300V in the application of appliances, instruments, electronic equipment and automation devices.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2951.11-2008 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables—Part 11: Methods for General Application—Measurement of Thickness and Overall Dimensions—Tests for Determining the Mechanical Properties
GB/T 2951.12-2008 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables—Part 12: Methods for General Application—Thermal Ageing Methods
GB/T 2951.13-2008 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables—Part 31: Methods Specific to PVC Compounds—Pressure Test at High Temperature—Test for Resistance to Cracking
GB/T 2951.14-2008 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables—Part14: Methods for General Application—Test at Low Temperature
GB/T 2951.31-2008 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables—Part 31: Methods Specific to PVC Compounds—Pressure Test at High Temperature—Test for Resistance to Cracking
GB/T 2951.32-2008 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables—Part 32: Methods Specific to PVC Compounds—Loss of Mass Test—Thermal Stability Test
GB/T 5023.2-2008 Polyvinyl Chloride Insulated Cables of Rated Voltages Up to and Including 450/750V—Part 2: Test Methods
GB/T 18380.12-2008 Test on Electric and Optical Fibre Cables under Fire Conditions—Part 12: Test for Vertical Flame Propagation for A Single Insulated Wire or Cable—Procedure for 1kW Pre-mixed Flame
GB/T 18380.22-2008 Test on Electric and Optical Fibre Cables under Fire Conditions—Part 22: Test for Vertical Flame Propagation for a Single Small Insulated Wire or Cable—Procedure for Diffusion Flame
JB/T 8734.1-2016 Polyvinyl Chloride Insulated Cables and Wires and Cords of Rated Voltages Up to and Including 450/750V—Part 1: General Requirements
3 Service Characteristics
3.1 Rated voltage U0/U of wires is 300/300V.
3.2 The long-term allowable operating temperature shall not exceed 90℃ for AVP-90 and RVP-90 wires and not exceed 70℃ for other types.