标准编号:	JB/T 8532-2008
中文名称:	脉冲喷吹类袋式除尘器
英文名称:	Pulse-bag filter
中标分类:	J88    环境保护设备
行业分类:	JB    机械行业标准
ICS分类:	13.030.40 13.030.40    废物处置和处理设备与装置 13.030.40
发布日期:	2008-3-12
实施日期:	2008-9-1
标准状态:	被替代
被新标准替代:	JB/T 8532-2023 脉冲喷吹类袋式除尘器
被替代日期:	2023-11-1
替代旧标准:	JB/T 8532-1997
翻译语言:	英文
文件格式:	PDF
中文字符数:	10,000 字
翻译价格(元):	680.00 元
交付时间:	付款后 1 个工作日

1 Scope



This Standard specifies technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of pulse-jet bag filters.

This Standard is applicable to pulse-jet bag filters (hereinafter referred to as bag filter).



2 Normative References



The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to, or revisions (excluding amended content) of, any of these publications do not apply. However, the parties whose enter into agreement according to these specifications are encouraged to research whether the latest editions of these documents are applied or not. For undated references, the latest edition of the normative document referred to applies.

GB/T 699 Quality Carbon Structural Steels

GB/T 700 Carbon Structural Steel (GB/T 700-2006, ISO 630: 1995, NEQ)

GB/T702 Hot-rolled Round and Square Steel Bars - Dimension, Shape, Weight and Tolerance (GB/T 702-2004, ISO 1035.1~1035-2: 1980, MOD)

GB/T 704 Hot-rolled Flats - Dimensions, Shape, Weight and Tolerances (GB/T 704-1988, neq ISO 1035-4: 1982)

GB/T 706 Hot-rolled beam steel - Dimensions, Shape, Weight and Tolerances (GB/T 706-1988, neq FOTC 8239: 1972)

GB/T 707 Hot-rolled Channel Steel - Dimensions, Shape, Weight and Tolerances (GB/T 707-1988, neq FOTC 8240: 1972)

GB/T 912 Hot-rolled Plates and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels

GB/T 985-1988 Basic Forms and Sizes of Weld Grooves for Gas Welding Manual Arc Welding and Gas-shielded Arc Welding

GB/T 986-1988 Basic Forms and Sizes of Weld Grooves for Submerged Arc Weld

GB/T 1804-2000 General Tolerances - Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications (eqv ISO 2768-1: 1989)

GB/T 3091 Welded Steel Pipes for Low Pressure Liquid Delivery (GB/T 3091-2001, neq ISO 559: 1991)

GB/T 3274 Hot-rolled Plates and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels

GB 4053.1 Safety Specifications for Fixed Steel Vertical Ladders

GB 4053.2 Safety Specifications for Fixed Steel Oblique Ladders

GB 4053.3 Safety Specifications for Fixed Industrial Protective Railings

GB 4053.4 Fixed Steel Industrial Platform

GB 4915 Emission Standard of Air Pollutants for Cement Industry

GB/T 6414 Castings - System of Dimensional Tolerances and Machining Allowances (GB/T 6414-1999, eqv ISO 8062: 1994)

GB/T 8162 Seamless Steel Tubes for Structural Purposes

GB/T 8163 Seamless Steel Tubes for Liquid Service

GB/T 8923 Rust Grades and Preparation Grades of Steel Surfaces Before Application of Paints and Related Products 8923-1988, eqv ISO 8501-1: 1988)

GB/T9439 Grey Iron Castings

GB/T 9787 Hot-rolled Equal-leg Angle Steel - Dimensions, Shape, Weight and Tolerances

GB/T 9788 Hot-rolled Unequal-leg Angle Steel - Dimensions, Shape, Weight and Tolerances

GB/T 12138-1989 Measuring Method for Performance of Bag Filter

GB 13223 Emission Standard of Air Pollutants for Thermal Power Plants

GB 13271 Emission Standard of Air Pollutants for Boilers

GB/T 13306-1991 Plates

GB/T 13384-1992 General Specifications for Packing of Mechanical and Electrical Product

GB 16171 Emission Standard of Air Pollutants for Coke Oven

HJ/T 324-2006 Specifications for Environmental Protection Product - Fabric for Bag House Filters

JB/T 5000.12-1998 Heavy Mechanical General Techniques and Standards - Paint

JB/T 5911-1991 Technical Requirements of Welding Parts of ESP

JB/T 5915-2006 Sequential Type Pulse Jet Controller for Baghouse Filters

JB/T 5916-2004 Electro-magnetic Pulse Jet Valve for Bag-house Filters

JB/T 5917-2006 Bag Cage for Baghouse Filters

JB/T 8471-1996 Technical Requirement and Acceptance Regulation for Bag Filter Erection

JB/T 10191-2000 Bag Filter - Safety Rules - Manifold for Pulse-jet Bag Filter



3 Terms and Definitions

1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
5 Test Method
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage