1 Scope
This part specifies the technical requirements, test methods and inspection rules of machinery vibrating stress relief device.
This part is applicable to the machinery vibrating stress relief device (hereinafter referred to as device) of castings, forgings, welding parts, molds and machining parts made of carbon structural steel, low-alloy steel, stainless steel, cast iron, nonferrous metals (copper, aluminum, titanium and their alloys) and other materials.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of JB/T 5925. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this part. However parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB 5226.1 Electrical Safety of Machinery — Electrical Equipment of Machines — Part 1: General Requirements (GB 5226.1-2002, IEC 60204-1:2000, IDT)
JB/T 1644-2005 Foundry Machinery — General Technical Requirement
JB/T 5925.1 Machinery Vibrating Stress Relief Device — Part 1: Basic Parameters
JB/T 6331.2 Method for Measuring Noise of Foundry Machinery — Determination of Sound Pressure Level
JB/T 9875 Metal Cutting Machine Tools — Technical Document Compiled
3 Terms and Definitions
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
5 Test Methods
6 Inspection Rules
7 Packaging, Marking, Storage and Transportation
