1 Scope
This part of JB/T 3687 specifies technical requirements, test methods, inspection rules, marking, labeling, operation instructions, packaging, transportation and storage of vibrating screens with base type installation.
This part is applicable to all vibrating screens with base type installation (hereinafter referred to as vibrating screen) specified in JB/T 3687.1-2012.
2 Normative References
The following documents for the application of this document are essential. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendment) applies.
GB/T 191 Packaging -Pictorial Marking for Handling of Goods
GB/T 1231 Specifications of High Strength Bolts with Large Hexagon Head, Large Hexagon Nuts, Plain Washers for Steel Structures
GB/T 3632 Sets of Torshear Type High Strength Bolt Hexagon Nut and Plain Washer for Steel Structures
GB 5226.1 Electrical Safety of Machinery - Electrical Equipment of Machines - Part 1: General Requirements
GB/T 6388 Transport Package Shipping Mark
GB/T 9969 General Principles for Preparation of Instructions for Use of Industrial Products
GB/T 11349.1 Vibration and Shock - Experimental Determination of Mechanical Mobility - Part 1: Basic Definitions and Transducers
GB/T 11349.2 Vibration and Shock - Experimental Determination of Mechanical Mobility - Part 2: Measurements Using Single-point Translation Excitation with an Attached Vibration Exciter
GB/T 11349.3 Vibration and Shock - Experimental Determination of Mechanical Mobility - Part 3: Measurement Using Impact Excitation
GB/T 13306 Plates
GB/T 13384 General Specifications for Packing of Mechanical and Electrical Product
JB/T 3278 Welding Slot Screen Plate
JB/T 3687.1-2012 Vibrating Screen with Base Type Installation - Part 1: Serial Type
JB/T 4042 Test Methods of Vibrating Screens
JB/T 5000.3-2007 Heavy Mechanical General Techniques and Standards-Part 3: And Standards Welding
JB/T 9031 Perforated Screen Plate for Ore
JB/T 9032 Metal Wire Screens for Ore
QC/T 29082 Specifications for Automobile Transmission Shaft Assembly
3 Technical Requirements
Foreword i
1 Scope
2 Normative References
3 Technical Requirements
3.1 General Technical Requirements
3.2 Performance Requirements of Complete Machine
3.3 Requirements for Main Components
3.4 Requirements for Main Parts and Components
3.5 Appearance Quality Requirements
3.6 Safe and Health Requirements
4 Test Methods
5 Inspection Rules
5.1 Inspection Classification
5.2 End-of-manufacturing Inspection
5.3 Type Inspection
6 Marking, Labeling and Operation Instructions
7 Packaging, Transportation and Storage
