1 Scope
This standard specifies technical requirements, test methods, inspection rules, marking, packaging, transportation and storage for assembled steel rack structure of high-bay warehouse.
This standard is applicable to assembled racking for high-bay warehouses with aisle stacking crane for cargo handling and load capacity of unit cargo bay not exceeding 3 000 kg.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 700-2006 Carbon Structural Steels
GB/T 1231 Specifications of High Strength Bolts with Large Hexagon Head, Large Hexagon Nuts, Plain Washers for Steel Structures
GB/T 1591-2008 High Strength Low Alloy Structural Steels
GB/T 3098.1-2010 Mechanical Properties of Fasteners—Bolts, Screws and Studs
GB/T 3632 Sets of Torshear Type High Strength Bolt Hexagon Nut and Plain Washer for Steel Structures
GB/T 5117 Carbon Steel Covered Electrodes
GB/T 5118 Low Alloy Steel Covered Electrodes
GB/T 8110 Welding Electrodes and Rods for Gas Shielding Arc Welding of Carbon and Low Alloy Steel
GB/T 9286-1998 Paints and Varnishes—Cross Cut Test for Films
GB/T 10045 Carbon Steel Flux Cored Electrodes for Arc Welding
GB/T 13306 Plates
GB/T 14957 Steel Wires for Melt Welding
GB/T 17493 Low Alloy Steel Flux Cored Electrodes for Arc Welding
GB 50205 Code for Acceptance of Construction Quality of Steel Structures
JB/T 9018-2011 Automated Storage and Retrieval System—Design Rules
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
4.1 Racking Structure of High-Bay Warehouse
4.2 Material
4.3 Fabrication
4.4 Overall Installation Requirements of Racking
5 Test Method
5.1 General Requirements
5.2 Testing of Manufacturing Accuracy
5.3 Overall Installation Accuracy Testing of Racking
6 Inspection Rules
6.1 Member Inspection
6.2 Overall Installation Inspection of Racking
7 Marking, Packaging, Transportation and Storage
7.1 Marking
7.2 Packaging and Transportation
7.3 Storage
