Molecular sieve 13X
1 Scope
This standard specifies the requirements, test methods, inspection rules, packaging, marking, storage and transportation of molecular sieve 13X.
It is applicable to molecular sieve 13X spherical and strip products and raw molecular sieve 13X powder, which are usually used to dry the general gas, purify raw gas for air separation device (removal of H2O and CO2) and desulfurize natural gas (removal of H2S and mercaptan).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 603 Chemical reagent - Preparations of reagent solutions for use in test methods
GB/T 6286 Determination of bulk density for molecular sieve
GB/T 6287 Determination of static adsorbed water for molecular sieve
GB/T 6288 Determination of particle size for granular molecular sieve
GB/T 6678-2003 General principles for sampling chemical products
GB/T 6679-2003 General rules for sampling solid chemical products
GB/T 6682 Water for analytical laboratory use - Specification and test methods
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 14563-2008 Specification and test method of Kaolin clay
HG/T 2783 Test methods for crushing strength of molecular sieve
3 Terms
For the purposes of this standard, the following terms and definitions apply.
3.1
molecular sieve 13X
molecular sieve whose framework with silica-alumina ratio of =2.6~3.0, valid pore diameter of and the typical chemical compound as Na2O·Al2O3·(2.8±0.2)SiO2·(6~7)H2O.
4 Requirements
4.1 The strip molecular sieve 13X shall meet the requirements of Table 1 and the indicated values.
Foreword i
1 Scope
2 Normative references
3 Terms
4 Requirements
5 Test method
6 Inspection rules
7 Packaging, marking, storage and transportation
