1 Scope
This standard specifies the technical requirements, test methods, inspection rules and requirements of marking, packaging, transport and storage, etc. for sanitary absorbent pad (including pantiliner).
This standard is applicable to the externally-used physical sanitary products for women in menstrual period (sanitary absorbent pad) and non-menstrual period (pantiliner) and which are molded by dedicated machinery and composed of surface layer, inner absorption layer and infiltration prevention bottom film, etc.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Foreword I
1 Scope
2 Normative References
3 Product Classifications
4 Technical Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packaging, Transport and Storage
Appendix A (Normative) Determination of Infiltration Capacity
Appendix B (Normative) Formula of Standard Composite Test Solution for Infiltration Performance Test of Sanitary Absorbent Pad
Appendix C (Normative) Determination of pH
Appendix D (Normative) Determination Method of Gum Adhesive Strength (180° Peeling Strength)
