1 Scope
This standard specifies a method of test for determining the ignitability of building products by direct small flame impingement under zero impressed irradiance using specimens tested in a vertical orientation.
The products that melt and shrink away from the flame without being ignited may be addressed by the additional procedure given in Appendix A.
Information on the precision of the test method is given in Appendix B.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
Foreword I
Contents
Foreword I
Introduction II
1 Scope
2 Normative References
3 Terms and Definitions
4 Test Apparatus
5 Test Specimen
6 Conditioning
7 Test Procedure
8 Expression of Results
9 Test Report
Appendix A (Normative) Procedure for Products which Melt and Shrink
Appendix B (Informative) Precision of Test Method
