Steel plate, sheet and strip for pressure equipment -
Part 7: Stainless steel and heat resisting steel
1 Scope
This document specifies the order contents, classification and code, dimension, shape, weight, technical requirements, test methods, inspection rules as well as packaging, marking and product quality certificate of stainless steel and heat resisting steel plate, sheet and strip for pressure equipment.
It is applicable to hot-rolled stainless steel and heat resisting steel plate, sheet and strip (including coil cutting steel plate/sheet), cold-rolled stainless steel and heat resisting steel plate, sheet and strip (including coil cutting steel plate/sheet) with width no less than 600mm for pressure equipment.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 223.5 Steel and iron - Determination of acid-soluble silicon and total silicon content - Reduced molybdosilicate spectrophotometric method
GB/T 223.9 Iron, steel and alloy - Determination of aluminum content - Chrome azurol S photometric method
GB/T 223.11 Iron, steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method
GB/T 223.18 Methods for chemical analysis of iron, steel and alloy - The sodium thiosulfate separation iodimetric method for the determination of copper content
GB/T 223.19 Methods for chemical analysis of iron, steel and alloy - The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.23 Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method
GB/T 223.25 Methods for chemical analysis of iron, steel and alloy - The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.26 Iron, steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method
GB/T 223.28 Methods for chemical analysis of iron steel and alloy - The α-benzoinoxime gravimetric method for the determination of molybdenum content
GB/T 223.30 Methods for chemical analysis of iron, steel and alloy - The arsenazo III spectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid
GB/T 223.33 Methods for chemical analysis of iron, steel and alloy - The chlorophosphonago mA photometric method for the determination of cerium content after extraction separation
GB/T 223.36 Methods for chemical analysis of iron, steel and alloy - The neutral titration method for the determination of nitrogen content after distillation separation
GB/T 223.40 Iron, steel and alloy - Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.43 Iron steel and alloy - Determination of tungsten content - Gravimetric method and spectrophotometric method
GB/T 223.58 Methods for chemical analysis of iron, steel and alloy - The sodium arsenite-sodium nitrite titrimetric method for the determination of manganese content
GB/T 223.59 Iron, steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy - The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T 223.69 Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace
GB/T 223.84 Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method
GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
GB/T 229 Metallic materials - Charpy pendulum impact test method
GB/T 230.1 Metallic materials - Rockwell hardness test - Part 1: Test method
GB/T 231.1 Metallic materials - Brinell hardness test - Part 1: Test method
GB/T 232 Metallic materials - Bend test
GB/T 708 Dimension, shape, weight and tolerance for cold-rolled steel strip and sheet
GB/T 709 Dimension, shape, weight and tolerance for hot-rolled steel strip, plate and sheet
GB/T 713.1 Steel plate, sheet and strip for pressure equipment - Part 1: General requirements
GB/T 2975 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
GB/T 4334 Corrosion of metals and alloys - Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels
GB/T 4340.1 Metallic materials - Vickers hardness test - Part 1: Test method
GB/T 6394 Determination of estimating the average grain size of metal
GB/T 11170 Stainless steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (routine method)
GB/T 13305 Micrographic method for determining area content of the α-phases in stainless steels
GB/T 20066 Steel and iron - Sampling and preparation of samples for the determination of chemical composition
GB/T 20123 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)
GB/T 20124 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (routine method)
GB/T 21433 Detecting susceptibility to intergranular corrosion in stainless steel pressure vessels
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 713.1 apply.
4 Order content
4.1 The order contents shall meet the requirements of GB/T 713.1.
4.2 The order contents shall also include the surface processing types (see 7.7.1).
Foreword I
Introduction II
1 Scope
2 Normative references
3 Terms and definitions
4 Order content
5 Classification and code
6 Dimensions, appearance and weight
7 Technical requirements
8 Test methods
9 Inspection rules
10 Packaging, marking and quality certificate
Annex A (Normative) Density value of stainless steel
Annex B (Informative) Comparison of stainless steel designations
Annex C (Informative) Heat treatment system for stainless steel
Annex D (Informative) Mechanical properties at high temperatures
Annex E (Informative) Strength of part austenitic heat resisting stainless steels at high temperatures
Bibliography
