1 Scope
This standard specifies a method for determining the bond strength of a butt joint when subjected to tensile force.
This standard is applicable to all types of adhesives.
This standard is intended for use under ambient conditions, it can also be applied to testing under a wide range of temperature and other environmental conditions.
The method requires rigid adherends that can be produced to the required dimensional tolerances and that will withstand the forces applied be them during the test.
2 Normative References
The following normative document contains provisions which, through reference in this text, constitute provisions of this standard. At time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
GB 2918-82(88) Plastics — Standard Atmospheres for Conditioning and Testing
GB/T 2943-94 Terms of Adhesive
Foreword II
ISO Foreword III
1 Scope
2 Normative References
3 Principle
4 Apparatus
5 Test Specimens
6 Conditioning and Test Atmosphere
7 Procedure
8 Expression of Results
9 Test Report
