1 Scope
This part of GB/T 5359 specifies the terms related to performances of motorcycles and mopeds.
This part is applicable to the motorcycles and mopeds (hereinafter referred to as "motorcycles") defined in GB/T 5359.1.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of GB/T 5359. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this part. However parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 5359.1 Term for Motorcycles and Mopeds - Types of Vehicles
GB/T 19596 Terminology of Electric Vehicles
3 Terms and Definitions
3.1 Terms related to stopping ability
3.1.1
stopping ability
quickness degree of process during which a motorcycle is compelled to stop immediately by manipulating brake under specified driving speed
3.1.2
stopping distance
displacement of motorcycle during period from manipulating brake to complete stop of motorcycle in specified passage under specified test conditions
3.1.3
braking force
force for motorcycle preventing wheel rolling along tangential direction of tyre when it's in braking state, under specified test conditions
3.1.4
braking deceleration
deceleration obtained by motorcycle in certain time due to action of brake system under specified test conditions
3.1.5
heat fade
temporary reduction degree of braking efficiency of brake due to effect of friction heat after motorcycle brake continuously works under specified test conditions
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
