1 Scope
This standard specifies the general grade requirements, material requirements, packaging methods and test methods for rustproof packaging.
This standard is applicable to the design, production and inspection of rustproof packaging.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 5048 Moisture-proof Packaging
GB/T 12339 Inner Packaging Materials in Preservation
GB/T 14188 General Rules for Selection and Using of Packaging Materials with Volatile Corrosion Inhibitor
GB/T 16265 Test method of packaging materials—Compatibility
GB/T 16266 Test Method of Packaging Materials—Contact Corrosion
GB/T 16267 Test Method of Packaging Materials—Vapors Corrosion Inhibiting Ability
GJB 145A-1993 Specification of Preservation Packaging
GJB 2494 Specification for Humidity Indicator Card
BB/T 0049 Mineral Desiccant for Packaging
3 Rustproof Packaging Grade
3.1 The rustproof packaging grade shall be determined according to the product properties, environmental conditions of product circulation, rustproof period and other factors.
3.2 The rustproof packaging grade is generally divided into Grade 1, Grade 2 and Grade 3, as shown in Table 1. If rustproof packaging is subjected to any special requirements, it may be carried out according to the special requirements.
Foreword i
1 Scope
2 Normative References
3 Rustproof Packaging Grade
4 General Requirements
5 Material Requirements
6 Rustproof Packaging Method
7 Test Methods
Annex A (Informative) Common Methods of Rustproof Packaging
