1 Scope
This standard specifies general terminology of machine-building technology, typical surface processing terminology and terminology on cold work, bench work and assembly as well as the associated definitions.
This standard is applicable to production, scientific research and teaching for machinery and equipment manufacturing industry
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrections to) or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest edition of the normative documents indicated below. For undated references, the latest edition of the normative document applies.
GB/T 3375 Welding Terminology
GB/T 4122.1 Packaging Terms - Part 1: Basic
3 General Terminology
3.1 Basic Terms
3.1.1
technology
the methods and processes to make various raw materials and semi-finished products into products
3.1.2
machine-building technology
a generic term for manufacturing methods and processes of various types of machine
3.1.3
typical process
the uniform processing methods and processes developed for the same group of parts according to the classification and grouping by structure and technology characteristics of the parts
Foreword i
1 Scope
2 Normative References
3 General Terminology
3.1 Basic Terms
3.2 Production Objects
3.3 Technological Methods
3.4 Technological Element
3.5 Process Documents
3.6 Tooling and Workpieces Set-up
3.7 Others
4 Typical Surface Machining Terms
4.1 Hole Machining
4.2 Excircle Machining
4.3 Surface Machining
4.4 Slot Machining
4.5 Thread Machining
4.6 Gear Face Machining
4.7 Three Dimensional Profiling
4.8 Miscellaneous
5 Common Terminology for Cold Work, Bench Work and Assembly
5.1 Cold Work
5.2 Bench Work
5.3 Assembly and Test
Index
Bibliography
