标准编号:	GB/T 41300-2022
中文名称:	民用无人机唯一产品识别码
英文名称:	Unique product identification code for civil unmanned aerial vehicle
行业分类:	GB    国家标准
ICS分类:	35.240.15 35.240.15    识别卡和有关装置 35.240.15
发布机构:	国家市场监督管理总局 国家标准化管理委员会
发布日期:	2022-03-09
实施日期:	2022-10-1
标准状态:	valid
翻译语言:	英文
文件格式:	PDF
中文字符数:	11000 字
翻译价格(元):	720.0
交付时间:	付款后 1~3 个工作日

Unique product identification code for civil unmanned aerial vehicle 1 Scope This document specifies the structure, identification method and requirements for product identification code of the complete civil unmanned aerial vehicle product. This document is applicable to the management of unique identification, life cycle and product traceability of the complete civil unmanned aerial vehicle product. 2 Normative references The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB/T 1988 Information technology - 7-bit coded character set for information interchange GB/T 18347 Code 128 GB/T 29768 Information technology - Radio frequency identification - Air interface protocol at 800/900 MHz 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 unmanned aerial vehicle; unmanned aircraft unmanned aerial vehicle operated by remote control equipment or self-contained program control unit Notes: 1 Unmanned aerial vehicle includes remotely piloted aircraft, autonomous aircraft and model aircraft. 2 Remotely piloted aircraft and autonomous aircraft are collectively referred to as unmanned aerial vehicles. [Source: GB/T 38152-2019, 2.1.1, modified]   3.2 civil drone; civil unmanned aerial vehicle remotely piloted aircraft and/or autonomous aircraft applied in flight activities in the civil field. 3.3 unique product identification code code that conforms to specific coding rules and is used for the unique identification of the identity of the complete civil unmanned aerial vehicle product 4 Abbreviations For the purposes of this document, the following abbreviations apply. MFC manufacturer code OID object identifier PMC product model code SN serial number

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Abbreviations 5 Structure of identification code 6 Identification method Bibliography

中华人民共和国国家标准 GB/T 41300-2022 Unique product identification code for civil unmanned aerial vehicle 民用无人机唯一产品识别码 2022-03-09发布 2022-10-01实施 国家市场监督管理总局 国家标准化管理委员会发布 前言 本文件按照GB/T 1.1-2020《标准化工作导则 第1部分:标准化文件的结构和起草规则》的规定起草. 请注意本文件的某些内容可能涉及专利。本文件的发布机构不承担识别专利的责任。 本文件由全国信息技术标准化技术委员会(SAC/TC 28)提出并归口. 民用无人机唯一产品识别码 1 范围 本文件规定了民用无人机整机产品识别码的结构、识别方式及要求。 本文件适用于民用无人机整机产品的唯一标识、生存周期和产品追溯的管理。 2 规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件，仅该日期对应的版本适用于本文件；不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件. GB/T 1988 信息技术信息交换用七位编码字符集 GB/T18347 128条码 GB/T 29768 信息技术﹑射频识别800/900 MHz空中接口协议 3 术语和定义 下列术语和定义适用于本文件. 3.1 无人驾驶航空器unmanned aerial vehicle; unmanned aircraft 由遥控设备或自备程序控制装置操纵，机上无人驾驶的航空器。 注： 1 无人驾驶航空器包括遥控航空器、自主航空器和模型航空器等。 2 遥控航空器和自主航空器统称无人机 [来源:GBT 38152-2019，2.1.1，有修改] 3.2 民用无人机civil drone; civil unmanned aerial vehicle 从事民用领域飞行活动的遥控航空器和/或自主航空器。 3.3 唯一产品识别码unique product identification code 符合特定编码规则,用于唯一标识民用无人机整机产品身份的代码。 4 缩略语 下列缩略语适用于本文件. MFC 制造商代码(manufacturer code) OID 对象标识符(object identifier) PMC 产品型号代码(product model code) SN 序列号(serial number) 5 识别码结构 6 识别方式 参考文献