1 Scope
This standard specifies the measuring methods for the radial internal clearance of deep groove ball bearing, self-aligning ball bearing, cylindrical roller bearing, needle roller bearing and self-aligning roller bearing.
This standard is applicable to the measurement of the radial internal clearance of rolling bearing (hereinafter referred to as "bearing").
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 4199-2003 Rolling Bearings - Tolerances - Definitions (ISO 1132-1: 2000, MOD)
GB/T 4662-2003 Rolling Bearings - Static Load Ratings (ISO 76: 1987, IDT)
JB/T 8788-1998 Feeler Gauge
JJF 1089-2002 Calibration Specification for Instruments for Measuring Radial Clearance of Rolling Bearing
Contents
Foreword I
1 Scope
2 Normative References
3 Measuring Principles of Radial Internal Clearance
4 Preparation before Measurement
5 General Specification for Measuring Apparatus
6 Measurement of Radial Internal Clearance of Deep Groove Ball Bearing
7 Measurement of Radial Internal Clearance of Self-aligning Ball Bearing
8 Measurement of Radial Internal Clearance of Cylindrical Roller and Needle Roller Bearings
9 Measurement of Radial Internal Clearance of Self-aligning Roller Bearing
