1 Scope
This standard specifies the classification, technical requirements and inspection methods of shims (or sensitivity shims) for magnetic particle testing.
This standard is applicable to type inspection and delivery inspection of shims. It may also be used as the basis for acceptance of user orders.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 6983 Soft magnetic iron
GB/T 12604.5 Non-destructive testing—Terminology—Terms used in magnetic particle testing
GB/T 19001 Quality management systems—Requirements (GB/T 19001-2008, ISO 9001:2008, IDT)
GB/T 27025 General requirements for the competence of testing and calibration laboratories (GB/T 27025-2008, ISO/IEC 17025:2005, IDT)
3 Terms and definitions
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Technical requirements
6 Inspection methods
7 Inspection rules
8 Marking
9 Mark and label
10 Packaging, transport and storage
Bibliography
