标准编号:	GB/T 23333-2024
中文名称:	蒸发式冷风扇
英文名称:	Evaporative air cooler
中标分类:	Y61    家用空调与冷藏器具
行业分类:	GB    国家标准
ICS分类:	23.120 23.120    通风机、风扇、空调器 23.120
发布机构:	国家市场监督管理总局 国家标准化管理委员会
发布日期:	2024-3-15
实施日期:	2024-10-1
标准状态:	valid
替代旧标准:	GB/T 23333-2009 蒸发式冷风扇
翻译语言:	英文
文件格式:	PDF
中文字符数:	23000 字
翻译价格(元):	1610.0
交付时间:	付款后 1~5 个工作日

Evaporative air cooler 1 Scope This document specifies the terms and definitions, classification and model designation, requirements, test method, inspection rules, marking, packaging, transportation and storage of evaporative air coolers for household and similar use (hereinafter referred to as "air cooler"). This document is applicable to the evaporative air coolers for household and similar use with single-phase rated voltage not exceeding 250V and other rated voltage not exceeding 480V. This document is not applicable to: ——air coolers but designed exclusively for industrial purposes; ——air coolers intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapor or gas); ——air coolers with rated output air volume exceeding 1,500m³/h. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB/T 1019 General requirements for the package of household and similar electrical appliances GB/T 1236 Industrial fans - Performance testing using standardized airways GB/T 2423.3 Environmental testing - Part 2: Testing method - Test cab: damp heat, steady state GB/T 2423.17 Environmental testing for electric and electronic products - Part 2: Test methods - Test Ka: Salt mist GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability) GB/T 4214.1 Test method for noise of household and similar electrical appliances - General requirements GB 4343.1 Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus - Part 1: Emission GB/T 4706.1 Household and similar electrical appliances - Safety - Part 1: General requirements GB/T 4706.23 Household and similar electrical appliances - Safety - Part 2: Particular requirements for room heaters GB/T 4706.27 Household and similar electrical appliances-safety - Part 2: Particular requirements for fans GB/T 4706.45 Household and similar electrical appliances - Safety - Particular requirements for air-cleaning appliances GB/T 4706.115 Household and similar electrical appliances - Safety - Part 115: Particular requirements for evaporative air cooler GB/T 7725 Room air conditioner GB 17625.1 Electromagnetic compatibility - Limits - Part 1: Limits for harmonic current emissions (equipment input current ≤16A per phase) GB 21551.2 Antibacterial and cleaning function for household and similar electrical appliances - Particular requirements of material GB/T 35758-2017 Household electrical appliances - Measurement of standby power 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 evaporative air cooler an apparatus that uses the principle of evaporation and heat absorption of water to mechanically ventilate air through a moist cooling pad, thereby lowering the temperature of the treated air 3.2 cooling pad a substance that provides an evaporation interface and increases the area of water-air contact 3.3 air flow volume of air delivered by an air cooler per unit of time under specified conditions Note: It is expressed in m3/h. The rated output air flow is specified by the manufacturer. 3.4 evaporative quanlity amount of water consumed per unit time by the air cooler during evaporative cooling operation under specified conditions Note: It is expressed in mL/h or L/h. The rated evaporation is indicated by the manufacturer. 3.5 energy efficiency ratio ratio of the sensible heat taken away by the air flow per unit time to the input power of the air cooler when the air cooler undergoes evaporative cooling under the specified conditions Note: It is expressed in W/W. 3.6 rated water tank capacity amount of water to be contained when the tank is filled to the highest indicated water level prescribed by the manufacturer Note: It is expressed in L. The rated water tank capacity is indicated by the manufacturer. 3.7 standby mode(s) when connected to the main power, the air cooler provides one or more of the following user-oriented functions or protection functions, which is a continuous mode for any product: ——other modes (including active mode on or off) can be triggered by triggering remote switches (including remote control), internal sensors and timers; ——continuous function: information or status display including clock; ——continuous function: sensor-based function. 4 Classification and model designation 4.1 Product classification By function: ——Single cooling type: with code omitted; ——Heating and cooling type: with code indicated by R.

Contents Foreword I 1 Scope 2 Normative references 3 Terms and definitions 4 Classification and model designation 5 Technical requirements 6 Test methods 7 Inspection rules 8 Marking, instructions for use, packaging, storage and transportation Annex A (Normative) Test method for ambient surface temperature rise Bibliography

蒸发式冷风扇 1 范围 本文件规定了家用和类似用途蒸发式冷风扇(以下简称“冷风扇”)的术语和定义、分类和型号命名、要求、试验方法、检验规则、标志、包装、运输与贮存。 本文件适用于单相器具额定电压不超过250 V, 其他器具额定电压不超过480V 的家用和类似用途的蒸发式冷风扇。 本文件不适用于： ——专为工业用途而设计的冷风扇； ——打算使用在经常产生腐蚀性或爆炸性气体(如粉尘、蒸气或瓦斯气体)等特殊环境场所的冷风扇； ——额定输出风量超过1500 m³/h的冷风扇。 2 规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件，仅该日期对应的版本适用于本标准；不注日期的引用文件，其最新版本(包括所有的修改单)话用干 本文件。 GB/T 1019 家用和类似用途电器包装通则 GB/T 1236 工业通风机 用标准化风道性能试验 GB/T 2423.3 环境试验 第2部分：试验方法试验 Cab: 恒定湿热试验 GB/T 2423.17 电工电子产品环境试验 第2部分：试验方法试验 Ka: 盐雾 GB/T 2828.1 计数抽样检验程序 第1部分：按接收质量限(AQL) 检索的逐批检验抽样计划 GB/T 2829 周期检验计数抽样程序及表(适用于对过程稳定性的检验) GB/T 4214.1 家用和类似用途电器噪声测试方法 通用要求 GB 4343.1 家用电器、电动工具和类似器具的电磁兼容要求 第1部分：发射 GB/T 4706.1 家用和类似用途电器的安全 第1部分：通用要求 GB/T 4706.23 家用和类似用途电器的安全 第23部分：室内加热器的特殊要求 GB/T 4706.27 家用和类似用途电器的安全 第27部分：风扇的特殊要求 GB/T 4706.45 家用和类似用途电器的安全 第45部分：空气净化器的特殊要求 GB/T 4706.115 家用和类似用途电器的安全 第115部分：蒸发式冷风扇的特殊要求 GB/T 7725 房间空气调节器 GB 17625.1 电磁兼容限值 第1部分：谐波电流发射限值(设备每相输入电流≤16A) GB 21551.2 家用和类似用途电器的抗菌、除菌、净化功能抗菌材料的特殊要求 GB/T 35758-2017 家用电器 待机功率测量方法 3 术语和定义 下列术语和定义适用于本文件。 3.1 蒸发式冷风扇 evaporative air cooler 利用水的蒸发吸热原理，以机械通风的方式使空气通过湿润的冷却填料，从而使被处理的空气温度降低的器具。 3.2 冷却填料 cooling pad 提供蒸发介面并增加水与空气接触面面积的物质。 3.3 输出风量 air flow 冷风扇在规定条件下，单位时间内所送出的风量。 注：单位为立方米每小时(m³/h) 。额定输出风量为制造商明示的输出风量。 3.4 蒸发量 evaporative quanlity 冷风扇在规定条件下进行蒸发冷却运行时，单位时间内所消耗的水量。 注：单位为毫升每小时或升每小时(mL/h 或L/h)。额定蒸发量为制造商明示的蒸发量。 3.5 能效比 energy efficiency ratio 冷风扇在规定条件下进行蒸发冷却运行时，单位时间内气流所带走的显热量与冷风扇输入功率之比。 注：单位为瓦每瓦(W/W)。 3.6 水箱容量 rated water tank capacity 水箱加水至制造商规定的最高指示水位时所容纳的水量。 注：单位为升(L)。额定水箱容量为制造商明示的水箱容量。 3.7 待机模式 standby mode(s) 冷风扇在连接到主电源时，提供以下一种或多种面向用户功能或保护功能，且为持续的任何产品模式： ——可以通过触发远程开关(包括远程控制),内部传感器，定时器来触发其他模式(包括活跃模式开启或停止) ——持续功能：信息或包含时钟的状态显示； ——持续功能：基于传感器的功能。 4 分类和型号命名 4.1 产品分类 按功能分： ——单冷式：其代号省略； ——冷暖式：其代号用 R 表示。