1 Scope
This standard specifies technical requirements marking, packaging, transportation and storage of transparent conductive glass with indium-tin oxide (ITO) films used in liquid crystal display (LCD).
This standard is applicable to the transparent conductive glass with indium-tin oxide films used in liquid crystal display.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 2828 Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)
GB/T 5270 Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings; Review of methods available for testing adhesion (eqv ISO 2819)
GB/T 14264 Semiconductor materials — Terms and definitions
3 Terms and Definitions
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Glass Substrate Specifications
5 Specifications if SiO2 Barrier
6 Specifications of ITO Conducting Film
7 Film Defects
8 Sampling
9 Inspection and Test Methods
10 Marking
11 Packaging, Transportation and Storage
