1 Scope
This standard specifies the general specification of amusement rides battery car category and technical requirements.
This standard is applicable to the design, manufacturing, installation, reconstruction, maintenance, test, inspection and usage management of amusement rides battery car (hereinafter referred to as battery car).
2 Normative References
The clauses in the following document will become the clauses by quoting by this standard. For dated reference, subsequent modification (not include the content of correction) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated normative reference, the latest edition of the normative document is applicable to this standard.
GB/T 528 "Rubber, Vulcanized or Thermoplastic ― Determination of Tensile Stress-Strain Properties" (GB/T 528-1998, eqv ISO 37: 1994)
GB/T 531 "Rubber-Determination of Indentation Hardness by Means of Pocket Hardness Meters"(GB/T 531-1999, idt ISO 7619: 1986)
GB/T 699 Quality carbon structural steels
GB/T 1447 Fiber-reinforced plastics composites-Determination of tensile properties
GB/T 1449 Fiber-reinforced plastic composites-Determination of flexural properties
GB/T 1451 Fiber-reinforced plastics composites — Determination of charpy impact properties
GB/T 1689 Rubber vulcanized—Determination of abrasion resistance (Akron Machine)
GR/T 2828.1 Sampling procedures for inspection by attributes ― Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (GB/T 2828.1-2008, ISO 2859-1: 1999, IDT)
GB/T 3077 Alloy structure steels
GB/T 7403.1 Lead acid traction batteries ― Part 1: technical specification (GB/T 7403.1-1996, neq IEC 254-1: 1983)
GB 8408—2008 Amusement device safety code
GB 11211 Intensity determination of vulcanized rubber and metallic binding stretch method (GB 11211—1989,cqv ISO 814: 1986)
3 General Principles
3.1 Battery car is refer to such amusement rides operating within specified car yard or lane, storage battery as power, electric motor transmission and mode of motion.
3.2 The design, manufacturing, installation, reconstruction, maintenance, test and usage management of battery car shall implement this standard and also meet the provisions in GB 8408-2008.
3.3 The design, manufacture, installation and usage of battery car shall guarantee personal safety.
3.4 All those requirements not mentioned in this standard shall be implemented according to relevant national standards, regulations and codes.
Foreword I
1 Scope
2 Normative References
3 General Principles
4 Basic Design Provisions
5 Transmission Systems
6 Electricity
7 Car Yard and Lane
8 Vehicles
9 Safety Devices
10 Fabrication and Installation
11 Test Methods
12 Inspection Rules
Annex A (Normative) Provisions on "Main Components", "Important Axes, Axis Pins" and "Important Welded Joints"
