1 Scope
This Standard specifies type, basic parameters and dimensions, technical requirements, inspection rules, test method as well as marking, packaging and warranty period of three-phase synchronous generators driven by reciprocating internal combustion engine (hereinafter referred to as "generators").
This Standard is applicable to the three-phase synchronous generators driven by the reciprocating internal combustion engine.
2 Normative References
The following normative documents contain provisions which, through reference in this Standard, constitute provisions of this Standard. For dated references, subsequent amendments (excluding corrigendum) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this Standard are encouraged to study whether the latest editions of these documents apply. For undated references, the latest editions of the normative documents referred to apply.
GB/T 191-2000 Packaging - Pictorial Marking for Handling of Goods (eqv ISO 780: 1997)
GB 755 Rotating Electrical Machines - Rating and Performance (GB 755-2008, idt IEC 60034-1: 2004)
GB/T 997 Rotating Electrical Machines - Classification of Types of Construction, Mounting Arrangements and Terminal Box Position of (IM Code) (IEC 60034-7: 2001, IDT)
GB/T 1029-2005 Test Procedures for Three-phase Synchronous Machines
GB/T 1096-2003 Square and Rectangular Keys
GB 1971-2006 Rotating Electrical Machines - Terminal Markings and Direction of Rotation (IEC 60034-8: 2002, IDT)
GB/T 1993-1993 Cooling Methods for Rotating Electrical Machines
GB/T 2820.6-1997 Reciprocating Internal Combustion Engines Driven Alternating Current Generating Sets - Part 6: Test Methods (eqv ISO 8528-6: 1993)
GB/T 4772.1-1999 Dimensions and Output Series for Rotating Electrical Machines - Part 1: Frame Numbers 56 to 400 and Flange Numbers 55 to 1080 (idt IEC 60072-1: 1991)
GB/T 4772.2-1999 Dimensions and Output Series for Rotating Electrical Machines - Part 2: Frame Numbers 355 to 1000 and Flange Numbers 1180 to 2360 (idt IEC 60072-2: 1990)
GB/T 4942.1-2006 Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) - Classification (IEC 60034-5: 2000, IDT)
GB 10068 Mechanical Vibration of Certain Machines with Shaft Heights 56mm and Higher - Measurement, Evaluation and Limits of Vibration Severity (GB 10068-2008, IEC 60034-14: 2007, IDT)
GB/T 10069.1-2006 Measurement of The Airborne Noise Emitted by Rotating Electrical Machinery and The Noise Limits - Part 1: Method for the Measurement of Airborne Noise Emitted by Rotating Electrical Machines (ISO 1680: 1999, MOD)
GB 10069.3 Measurement of Airborne Noise Emitted by Rotating Electrical Machines and the Noise Limits - Part 3: Noise Limits (GB 10069.3-2008, IEC 60034-9: 2007, IDT)
GB/T 12665-2008 Requirements of Damp-heat Testing of Electrical Machine for Service in General Environmental Condition
GB 14711-2006 Safety Requirements of Small and Medium Size Rotating Electrical Machines
JB/T 5810-2007 Test Specifications of Interturn Insulation of Field Pole Coil and Field Winding for Electrical Machines
JB/T 5811-2007 Test Method and Limits of Form-wound Winding for Alternating Current Low-voltage Electrical Machines
JB/T 9615.1-2000 Test Methods of the Interturn Insulation on Random Wound Winding for AC Low-voltage Machines
JB/T 9615.2-2000 Test Limits of the Interturn Insulation on Random Wound Winding for AC Low-voltage Machines
JB/T 10098-2000 Impulse Voltage Withstand Levels of Rotating a. c. Machines with Form-wound Stator Coils (idt IEC 60034-15: 1995)
3 Types, Basic Parameters and Dimensions
3.1 The enclosure protection grade of the generators is agreed by the user and the manufacturer according to GB/T 4942.1-2006.
3.2 Cooling method for the generators is agreed by the user and the manufacturer according to GB/T 1993-1993.
Foreword I
1 Scope
2 Normative References
3 Types, Basic Parameters and Dimensions
4 Technical Requirements
5 Inspection Rules and Test Methods
6 Marking, Packaging and Warranty Period
