This standard specifies product classification, technical requirements, test methods, inspection rules, marking and packaging, transportation and storage of A.C. electric fans and regulators.
This standard is applicable to A.C. motor-driven table fans, wall fans, floor fans, pedestal fans, ceiling fans, top fans, louver fans, tower fans and decorated ceiling fans, as well as their regulators of single-phase rated voltage not exceeding 250V and other rated voltages not exceeding 480V.
This standard is not applicable to electric fans intended for use under other special conditions.
The safety requirements for electric fans and regulators contained in this standard shall comply with GB 4706.27 Safety of Household and Similar Electrical Appliances—Particular Requirements for Fans.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 191 Packaging—Pictorial Marking for Handling of Goods (GB/T 191-2000, eqv ISO 780:1997)
GB 1002 Single Phase Plugs and Socket-outlets for Household and Similar Purposes—Types, Basic Parameters and Dimensions
GB 1003 Three Phase Plugs and Socket-outlets for Household and Similar Purposes—Types, Basic Parameters and Dimensions
GB/T1019 General Requirements for Packings of Household Electrical Appliances
GB 2099.1 Plugs and Socket-outlets for Household and Similar Purposes—Part 1: General Requirements (GB 2099.1-1996, eqv IEC 60884-1:1994)
GB/T 2423.3 Environmental Testing for Electric and Electronic Products—Part 2: Testing Method—Test Cab: Damp Heat Steady State (GB/T 2423.3-2006, IEC 60068-2-78: 2001, IDT)
GB/T 2423.17 Basic Environmental Testing Procedures for Electric and Electronic Products—Test Ka: Salt Mist (GB/T 2423.17-1993, eqv IEC 60068-2-11: 1981)
GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributea—Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO 2859-1:1999, IDT)
GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Apply to Inspection of Process Stability)
GB/T 3667.1 AC Motor Capacitors—Part 1: General—Performance, Testing and Rating—Safety Requirements—Guide for Installation and Operation (GB/T 3667.1-2005, IEC 60252-1: 2001, IDT)
GB/T 4214.1-2000 Acoustics—Household and Similar Electrical Appliances—Test Code for Determination of Airborne Acoustical Noise—Part 1: General Requirements (eqv IEC 60704-1: 1997)
GB 4706.27 Safety of Household and Similar Electrical Appliances—Particular Requirements for Fans (GB 4706.27-2003, IEC 60335-2-80: 1997, IDT)
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Technical Requirements
6 Test Method
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
Annex A (Normative) Calculation of Air Delivery for Table Fan, Wall Fan, Floor Fan, Pedestal Fan, Louver Fan and Top Fan
Annex B (Normative) Calculation of Air Delivery for Ceiling Fan and Decorated Ceiling Fan
Annex C (Informative) Additional Definitions
