1.0.1 This code is formulated with a view to making the design of producer gas station (hereinafter referred to as "gas station") being able to guarantee the safety production, energy conservation, environmental protection and improving working condition as well as to achieving advanced technology and reasonable economy.
1.0.2 This code is applicable to the design of the constructed, extended and renovated constant-pressure fixed-bed producer gas stations and their gas pipes of industrial enterprises. This code is not applicable to the design of water gas station and its water gas pipe.
1.0.3 For the gas station extension and renovation project, the original equipment, pipe, building and structure shall be reasonably and fully used.
1.0.4 The environment protection facilities of gas station must be designed, constructed and put into operation simultaneously with the principal part of the project.
1.0.5 The discharge of hazardous substances and the noise control of gas station shall comply with the relevant current standards of the nation.
1.0.6 In addition to the requirements stipulated in this code, the design of gas station and its gas pipe also shall comply with those specified in the current relevant standards of the nation.
1 General Provisions
2 Terms
3 Coal Type Selection
4 Design Output and Quality
5 Station Layout
6 Equipment Selection
7 Equipment Safety
8 Process Arrangement
9 Air Pipe
10 Auxiliary Equipment
11 Storage and Transportation of Coal and Ash
12 Water Supply, Drainage and Circulation
13 Thermal Measurement and Control
14 Heating, Ventilation and Dust Abatement
15 Electric
16 Building and Structure
17 Gas Pipe
Appendix A Minimum Horizontal Clear Distance from Overhead Gas Pipes to Buildings, Structures and Pipelines in Factory
Appendix B Minimum Cross Clear Distance from Overhead Gas Pipes to Railways, Roads, Overhead Electric Lines and Other Pipes in Factory
Appendix C Minimum Horizontal Clear Distance from Overhead Gas Pipes to Other Parallel Pipes Laid on the Same Rack in Factory
Appendix D Minimum Parallel, Vertical, Cross Clear Distance between Overhead Cold Gas Pipes and Other Pipelines in Workshops
Explanation of Wording in This Code
List of Quoted Standards
