This Standard specifies general requirements, requirements and test method, test rules and labels of manual fire call points.
This Standard is applicable to manual fire call points installed in general industry and civilian construction, other fire call points with specific functions shall also comply with this Standard.
Contents
Foreword III
1. Scope
2. Normative references
3. General requirements
3.1 General provisions
3.2 Operation manual
3.3 Start-up elements
3.4 Alarm confirmation light
3.5 Reset
3.6 Test means
3.7 Structural design
4. Requirements and test method
4.1 General provisions
4.2 Action performance test
4.3 Function test
4.4 Test means inspection
4.5 Reliability test
4.6 Power parameter fluctuation test
4.7 High temperature (operation) test
4.8 High temperature (endurance) test
4.9 Low temperature (operation) test
4.10 Alternative moist heat (operation) test
4.11 Constant moist heat (endurance) test
4.12 SO2 corrosion (endurance) test
4.13 Impact (operation) test
4.14 Collision (operation) test
4.15 Vibration (sinusoidal) (operating) test
4.16 Vibration (sinusoidal) (endurance) test
4.17 Electrostatic discharge immunity test
4.18 Radiated, radio-frequency, electromagnetic field immunity test
4.19 Test for immunity to conducted interferences, induced by radio-frequency fields
4.20 Electrical fast transient/burst immunity test
4.21 Surge immunity test
4.22 Rain drop test
5. Test rules
5.1 Delivery test of product
5.2 Version inspection
6. Marking
6.1 Product marking
6.2 Quality inspection marking
Appendix A (Normative) Action Performance Test Device of Manual Fire Call Points
