1 Scope
This standard specifies requirements, test methods, inspection rules, and marking, packaging, transportation and storage of instrument panel assembly and console assembly for passenger cars.
This standard applies to instrument panel assembly and console assembly, made by forming process, for passenger cars, but it does not apply to instruments, controls or electrical parts that installed on the assemblies, or decorative parts using water transfer printing, painting and electroplating.
2 Normative references
The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Grey scale for assessing change in color
GB 251 Gray scale for assessing staining
GB/T 3922 Textiles—Testing method for color fastness to perspiration
GB 8410 Flammability of automotive interior materials
GB/T 9286 Paint and varnishes—Cross cut test for films
GB 11552 The interior fittings of passenger car
3 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
instrument panel assembly
the interior decorative part of passenger car, in front of the front passengers and under the front windshield, on which various instruments and controls, etc. are installed
3.2
instrument panel zone 1
the zone of instrument panel subject to direct sunlight
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transportation and storage
