1 Scope
This standard specifies the terminologies and definitions, product classification, requirements, test methods, inspection rules and marking, packaging, transportation and storage of office chairs.
This standard is applicable to office chairs; chairs of similar uses in other occasions may refer to this standard.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 3325-2008 Metal Furniture - General Technical Requirements
GB/T 3920 Textiles - Tests for Colour Fastness - Colour Fastness to Rubbing
GB 5296.6 Instructions for Use of Products of Consumer Interest-Part 6: Furniture
GB/T 6343 Cellular Plastics and Rubbers - Determination of Apparent Density
GB/T 6669-2008 Flexible Cellular Polymeric Materials - Determination of Compression Set
GB/T 6670-2008 Flexible Cellular Polymeric Materials - Determination of Resilience by Ball Rebound
GB/T 9286 Paints and Varnishes--Cross Cut Test for Films
GB/T 10357.2 Test of Mechanical Properties of Furniture - Part 2: Stability of Chairs and Stools
GB/T 10357.3-2013 Test of Mechanical Properties of Furniture - Part 3: Strength and Durability of Chairs and Stools
GB 17927.1 Upholstered Furniture - Assessment of the Resistance to Ignition of Mattress and Sofa - Part 1: Smouldering Cigarette
GB 17927.2 Upholstered Furniture - Assessment of the Resistance to Ignition of Mattress and Sofa - Part 2:Match Flame Equivalent
GB/T 18204.2-2014 Examination Methods for Public Places - Part 2:Chemical Pollutants
GB 18587-2001 Indoor Decorating and Refurbishing Materials-Limitations of Harmful Substances Emitted from Carpets, Carpet Cushions and Adhesives
GB/T 29525-2013 Chair Height Adjustment Gas Spring - Technical Specification
GB 50325-2010 Code for Indoor Environmental Pollution Control of Civil Building Engineering
QB/T 3826 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products - Neutral Salt Spraying Test (NSS)
3 Terminologies and Definitions
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Product Classification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
Appendix A (Normative) 64kg Load Module
Appendix B (Normative) Impact Bag
