1 Scope
This standard specifies the terminologies and definitions, classification, specification and marking, general provisions, requirements, test methods, inspection rules and marking, packaging, storage and transportation of magnesia decorative board for building.
This standard is applicable to indoor decorating and refurbishing engineering, but it is not applicable to the locations where are wet for a long time.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1596 Fly Ash Used for Cement and Concrete
GB/T 3830 Calendered Film and Sheet from Flexible Polyvinyl Chloride
GB 6566 Limit of Radionuclides in Building Materials
GB/T 7019-1997 Test Methods for Fiber Cement Products
GB 8624 Classification for Burning Behavior of Building Materials and Products
GB 9755 Synthetic Resin Emulsion Coatings for Exterior Wall
GB 9757 Solvent-thinned Coatings for Exterior Wall
GB/T 17657-1999 Test Methods of Evaluating the Properties of Wood-based Panels and Surface Decorated Wood-based Panels
GB 18580-2001 Indoor Decorating and Refurbishing Materials - Limit of Formaldehyde Emission of Woodbased Panels and Finishing Products
GB/T 19367-2009 Wood-based Panels-Determination of Dimensions of Panels
JC/T 209 Expanded Perlite
JC 688 Glass Fiber & Magnesium Cement Board
JG/T 301-2011 Machine-made Glass Fibre Reinforced Magnesium Oxychloride Cement Compound and Duct
LY/T 1143 Impregnated Thermosetting Resins Paper for Decoration
LY/T 1599 Rotary Veneer
LY/T 1654 Multilaminar Decorative Veneer
LY/T 1831 Decorative Paper for Wood-based Panels
WB/T 1018 Industrial Magnesium Chloride for Magnesium Oxychloride Cement Products
WB/T 1019 Caustic Burned Magnesia for Magnesium Oxychloride Cement Products
WB/T 1023 Magnesite Cement Material Modifier
WB/T 1306 Glass Fiber Nets Used for Magnesite Products
3 Terminologies and Definitions
For the purposes of this document, the following terminologies and definitions apply.
3.1
The common magnesium decorative board
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Classification, Specification and Marking
5 General Provisions
6 Requirements
7 Test Methods
8 Inspection Rules
9 Marking, Packaging, Storage and Transportation
Appendix A (Informative) Main Fillers and Finish Materials
