HJ 1350-2024 Technical specification for vehicle environmental information disclosure
Technical specification for vehicle environmental information disclosure
1 Scope
This standard specifies the entities, content, time, method, inspection technical requirements of vehicle environmental information disclosure, as well as the formats and items of vehicle environmental identification documents (VEID).
This standard is applicable to vehicle environmental information disclosure by vehicle manufacturing enterprises, vehicle import enterprises, and inspection agencies.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB 1495 Limits and measurement methods for noise emitted by accelerating motor vehicles
GB 3847 Limits and measurement methods for emissions from diesel vehicles under free acceleration and lugdown cycle
GB 7258 Technical specifications for safety of power-driven vehicles operating on roads
GB 11340 Limits and measurement methods for crankcase pollutants from heavy-duty vehicles equipped with P.I engines
GB 14622 Limits and measurement methods for emissions from motorcycles (China IV)
GB 14762 Limits and measurement method for exhaust pollutants from gasoline engines of heavy-duty vehicles (III, IV)
GB 14763 Limits and measurement methods for fuel evaporative Pollutants from heavy-duty vehicles equipped with P. I. engines (Trap method)
GB 16169 Limit and measurement method of noise emitted by accelerating motorcycles and mopeds
GB 16735 Road vehicle - Vehicle identification number (VIN)
GB 17691 Limits and measurement methods for emissions from diesel fuelled heavy-duty vehicles (China VI)
GB 18176 Limits and measurement methods for emissions of pollutants from mopeds (China Stage IV)
GB 18285 Limits and measurement methods for emissions from gasoline vehicles under two-speed idle conditions and simple driving mode conditions
GB 18322 Limits and measurement methods for smoke at free acceleration from agricultural vehicles
GB 18352.6 Limits and measurement methods for emissions from light-duty vehicles (China VI)
GB 19757 Limits and measurement methods for noise emitted by accelerating tri-wheel and low-speed vehicle (China I, II)
GB 20890 Test procedures and requirements of durability of emission control systems for heavy-duty vehicles
GB 20891 Limits and measurement methods for exhaust pollutants from diesel engines of non-road mobile machinery (CHINA Ⅲ, Ⅳ)
GB 30510 Fuel consumption limits for heavy-duty commercial vehicles
GB/T 788 Formats and their sizes of books and magazines
GB/T 19233 Measurement methods of fuel consumption for light-duty vehicles
GB/T 19753 Test methods for energy consumption of light-duty hybrid electric vehicles
GB/T 21085 Qualified certificate of vehicle
GB/T 27840 Fuel consumption test methods for heavy-duty commercial vehicles
HJ/T 390 Technical requirement for environmental protection product - Control system of fuel evaporative pollutants from vehicle with petrol engine
HJ 1014 Emissions control technical requirements of non-road diesel mobile machinery
HJ 1137 Measurement methods for non-regulated emissions from methanol fuelled vehicles
3 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
vehicle environmental information disclosure
vehicle manufacturing enterprises and vehicle import enterprises disclose the emission inspection information and pollution control technology information of the vehicles manufactured and imported by them to the public through their official websites and the vehicle environmental protection information disclosure platform in accordance with the requirements of the Law of the People's Republic of China on Prevention and Control of Atmospheric Pollution
3.2
vehicle environmental information disclosure platform
platform that serves vehicle manufacturing enterprises and vehicle import enterprises to disclose vehicle environmental information (website: www.vecc.org.cn) and facilitates relevant government departments, the public and enterprises to inquire and use the information
3.3
vehicle environmental identification document (VEID)
list of vehicle environmental identification documents that meet the formats specified in this standard and distributed along with vehicles by vehicle manufacturing enterprises and vehicle import enterprises after the vehicles are manufactured and inspected. These documents include the enterprise's statement that the vehicle meets the emission standards at applicable stages, basic vehicle information, emission inspection information, pollution control information and basic enterprise information
3.4
serial number of vehicle environmental information disclosure
code that reflects the category, emission stage and other information of the vehicle model and is automatically generated in the vehicle environmental information disclosure platform after a vehicle manufacturing enterprise or a vehicle import enterprise completes the vehicle information disclosure, which consists of 29 digits, spaces and letters
3.5
engine and chassis environmental information login
vehicle manufacturing enterprises and vehicle import enterprises register the emission inspection information and pollution control technology information of heavy-duty vehicle engines, tri-wheel vehicle engines and Class II chassis of heavy-duty vehicles through the vehicle environmental information disclosure platform
3.6
vehicle identification number (VIN)
a group of characters assigned to a vehicle by the vehicle manufacturer for identification purposes
3.7
engine serial number
a group of characters assigned to a engine by the engine manufacturer for identification purposes
3.8
pollution control devices
devices that control, limit and/or monitor exhaust and evaporative emissions
3.9
permanent identifier
identifier that reflects information such as manufacturer and product model. This identifier shall not be destroyed during normal driving, maintenance and maintenance across the whole life cycle of a vehicle
4 General requirements
4.1 Information disclosure entities
4.1.1 Vehicle manufacturing enterprises and vehicle import enterprises with independent legal personality are the entities of vehicle environmental information disclosure.
4.1.2 Vehicle environmental information disclosure entities shall be responsible for the authenticity, accuracy, timeliness and completeness of information disclosure.
4.2 Information disclosure content
4.2.1 The information disclosure content includes basic enterprise information, vehicle model information, vehicle information and technical documents of mass-produced vehicles.
4.2.2 Basic enterprise information includes enterprise name, enterprise address, legal representative, and contact information.
4.2.3 Vehicle model information includes vehicle model technical parameters, engine technical parameters, type inspection information, pollution control technical information, key environmental protection technical information (applicable to pure electric vehicle and fuel cell electric vehicle), and CO2 emission information (if any).
4.2.4 Vehicle information includes VIN, engine serial number and offline inspection information. VIN shall meet the requirements of GB 16735, and engine serial number may refer to the requirements of GB/T 21085.
4.2.5 Technical documents of mass-produced vehicles include environmental production consistency information, in-use compliance information, and evaluation and test information of mass-produced vehicles.
4.3 Information disclosure time
4.3.1 Vehicle manufacturing enterprises shall complete the disclosure of vehicle models and vehicle environmental information before the products are delivered.
4.3.2 Motor vehicle import enterprises shall complete the disclosure of vehicle models and vehicle environmental information before the entry of the goods into the country (the date of issuance of goods import certificates).
4.3.3 Vehicle manufacturing enterprises and vehicle import enterprises shall conduct environmental information disclosure of mass-produced vehicle technical documents after the vehicles are mass-produced or imported.
4.4 Information disclosure method
4.4.1 Vehicle manufacturing enterprises and vehicle import enterprises shall publish vehicle environmental information on their official websites, and upload it to the vehicle environmental information disclosure platform (website: www.vecc.org.cn) simultaneously for relevant government departments, the public and enterprises to inquire and use.
4.4.2 Vehicle manufacturing enterprises and vehicle import enterprises which do not have the conditions to disclose vehicle environmental information on their official websites shall disclose the vehicle environmental information on the vehicle environmental information disclosure platform.
Contents
Foreword i
1 Scope
2 Normative References
3 Terms and definitions
4 General requirements
5 Information disclosure process and requirements
6 Inspection information for environmental information disclosure
7 Pollution control technology information
8 Vehicle environmental identification documents (VEID)
9 Other requirements
10 Implementation of the standard
Annex A (Normative) Technical requirements of data items of vehicle environmental identification documents
Annex B (Normative) Technical requirements for change, correction and cancellation of disclosed environmental information
Annex C (Normative) Technical requirements for type inspection items in environmental information disclosure
Annex D (Normative) Technical requirements for type inspection report
Annex E (Normative) Technical requirements for permanent identifier
Annex F (Normative) Style and technical requirements of vehicle environmental identification document
