1 Scope
This standard specifies the requirements, test methods, inspection rules, marking and labeling, as well as packaging, transport and storage of wet phosphoric acid for industrial use.
This standard is applicable to the wet phosphoric acid for industrial use produced by dihydrate process and sulfuric acid leaching. This product is mainly used for the production of purified phosphoric acid and other industrial phosphates.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 1250 Rules for expression and judgment of limiting values
GB/T 6678 General principles for sampling chemical products
GB/T 6680 General rules for sampling liquid chemical products
GB/T 6682-1992 Water for laboratory use - Specifications (eqv ISO 3696: 1987)
HG/T 3696.2 Inorganic chemical products - Preparations of standard solutions for chemical analysis
HG/T 3696.3 Inorganic chemical products - Preparations of reagent solutions for chemical analysis
3 Molecular formula and relative molecular mass
Molecular formula: H3PO4
Relative molecular mass: 97.99 (as per the international relative atomic mass in 2005).
Foreword i
1 Scope
2 Normative references
3 Molecular formula and relative molecular mass
4 Requirements
5 Test method
6 Inspection rules
7 Marking and labeling
8 Packaging, transport and storage
