1.0.1 This provision is the procedure of quality assurance that the instrumentation shall conform to when implementing design control or compiling (drawing) engineering design documents. It is the guidance document for implementation of quality assurance and the basic measures to ensure design quality.
1.0.2 This provision id applicable for the designer, checker, auditor, leader, office director or engineer in charge to carry out activities relate to quality during the engineering design and fulfill respective quality responsibilities. This provision is also applicable to the quality assurance during the foundation design/preliminary design.
1.0.3 Relevant standards are as follows:
HG/T 20636.6 "Task for Engineering Design of Instrumentation"
HG/T 20636.9 "Checking List for Review and Approval for Engineering Design of Instrumentation"
HG/T 20637.1 "Composition and Preparation for Engineering Documents of Instrumentation"
HG/T 20638 "Specification for Details of Engineering Design of Instrumentation"
During the implementation of this provision, the provisions of current relevant national standard shall be conformed too.
1 General Provisions
2 Quality Responsibilities of Personnel at All-Levels
3 Quality Assurance of Design Control
4 Procedure of Quality Assurance for Design Document
