标准编号:	GB/T 5781-2016
中文名称:	六角头螺栓 全螺纹 C级
英文名称:	Hexagon head bolts—Full thread—Product grade C
行业分类:	GB    国家标准
发布机构:	中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:	2016-02-24
实施日期:	2016-6-1
标准状态:	valid
替代旧标准:	GB/T 5781-2000 六角头螺栓 全螺纹 C级
翻译语言:	英文
文件格式:	PDF
中文字符数:	10000 字
翻译价格(元):	290.0
交付时间:	付款后 1 个工作日

1 Scope This standard specifies the types, dimensions, specifications and designation of hexagon head bolts with full thread of Grade C. This standard is applicable to hexagon head bolts with threads from M5 to M64, full thread, of performance grades 4.6 and 4.8, and of product grade C. Note: This type of product is the same as that covered by IGB/T 5780 with the exception of full thread. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 90.1 Fasteners - Acceptance Inspection (GB/T 90.1-2002, IS0 3269:2000, IDT) GB/T 90.2 Fasteners - Marking and Packaging GB/T 193 General Purpose Metric Screw Threads - General Plan (GB/T 193-2003, ISO 261:1998, MOD) GB/T 1237 Designation System for Fasteners (GB/T 1237-2000, eqv ISO 8991:1986) GB/T 3098.1 Mechanical Properties of Fasteners - Bolts, Screws and Studs (GB/T 3098.1-2010, ISO 898-1:2009, MOD) GB/T 3103.1 Tolerances for Fasteners - Bolts, Screws and Nuts (GB/T 3103.1-2002, idt ISO 4759-1:2000) GB/T 5267.1 Fasteners - Electroplated Coatings (GB/T 5267.1-2002, ISO 4042:1999 , IDT) GB/T 5267.2 Fasteners - Non-electrolytically Applied Zinc Flake Coatings (GB/T 5267.2-2002, ISO 10683:2000, IDT) GB/T 5276 Fasteners - Bolts, Screws, Studs and Nuts - Symbols and Designations of Dimensions (GB/T 5276-2015, ISO 225:2010, MOD) GB/T 5780 Hexagon Head Bolts - Product Grade C (GB/T 5780-2016, ISO 4016:2011, MOD) GB/T 9145 General Purpose Metric Screw Threads - Limits of Sizes for the Screw Threads of Medium Quality and Preferable Plan (GB/T 9145-2003, ISO 965-2:1998, MOD) GB/T 16938 Fasteners - General Requirements for Blots, Screws, Studs and Nuts (GB/T 16938-2008, ISO 8992:2005, IDT) 3 Dimensions See Figure 1 and Tables 1 and 2 for types and dimensions of bolts. Symbols and descriptions of dimensions are specified in GB/T 5276.

Foreword i 1 Scope 2 Normative References 3 Dimensions 4 Specifications and Reference Standards 5 Designation