1 Scope
This standard mainly specifies the requirements for terms, definitions, guarantees, governing, operation, maintenance, components, etc. of high-power fixed power plant turbine; other types of turbines and small turbines may be implemented by making reference.
This standard is applicable to fixed power plant turbine driving generator, and some clauses are also applicable to the turbines for other purposes.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Guarantees
5 Governing
6 Operation and Maintenance
7 Components
8 Foundations and Buildings
9 Feed Pump Drives
10 Turbine Auxiliary System
11 Instrumentation
12 Protection
13 Vibration
14 Noise
15 Tests
16 Delivery and Installation
17 Design Information to Be Supplied by the Purchaser
18 Design Information to Be Provided by the Supplier
19 Turbine Plant with Regenerative Feed Water Heating
Annex A (Normative) Electronic Governors
Annex B (Informative) Technical Differences between this Standard and IEC 60045-1: 1991 and the Causes
GB/T 5578-2007 引用如下标准：
*GB/T 11348.1-1999 旋转机械转轴径向振动的测量和评定 第1部分:总则 *GB/T 11348.2-1997 旋转机械转轴径向振动的测量和评定 第2部分:陆地安装的大型汽轮发电机组 *ISO 2372:1974 "Mechanical Vibration of Machines with Operating Speeds from 10 to 200 rev/s-Basis for Specifying Evaluation Standards" *IEC 60651:1979 "Sound Level Meters" *IEC 60953-1:1990 "Rules for Steam Turbine Thermal Acceptance Tests-Part 1: Method A-High Accuracy for Large Condensing Steam Turbines" *IEC 60953-2:1990 "Rules for Steam Turbine Thermal Acceptance Tests-Part 2: Method B-Wide Range of Accuracy for Various Types and Sizes of Turbines" *ASME PTC6:1996 "Steam Turbines Performance Acceptance Test Codes"
