标准编号:	GB/T 26945-2011
中文名称:	集装箱空箱堆高机
英文名称:	Empty container handler
中标分类:	J83    仓储设备、装卸机械
行业分类:	GB    国家标准
ICS分类:	53.060 53.060    工业车辆 53.060
发布机构:	中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:	2011-9-29
实施日期:	2012-2-1
标准状态:	被替代
被新标准替代:	GB/T 26945-2023 集装箱空箱堆高机
被替代日期:	2024-4-1
翻译语言:	英文
文件格式:	PDF
中文字符数:	10000 字
翻译价格(元):	290.00 元
交付时间:	付款后 1 个工作日

Empty container handler



1 Scope



This standard specifies the requirements, test methods, inspection rules and markings, packaging, transportation and storage of empty container handler (hereinafter referred to as "handler").



This standard is applicable to empty container handlers for loading and unloading containers specified in GB/T 1413.



2 Normative references



The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendment) applies.



GB/T 1413 Series 1 freight containers — Classification,dimensions and ratings (GB/T 1413-2008, ISO 668:1995, IDT)

GB/T 3220 Freight container spreader

GB 4785 Instructions for installation of the external lighting and light-signalling devices for motor vehicles and their trailers

GB/T 7593 Powered industrial trucks — Symbols for operator controls and other displays (GB/T 7593-2008, ISO 3287:1999, IDT)

GB/T 9286 Paints and varnishes — Cross cut test for films (GB/T 9286-1998, eqv ISO 2409: 1992)

GB 10827 Powered industrial trucks — Safety code (GB 10827-1999, eqv ISO 3691: 1980)

GB/T 13306 Plates

GB/T 14039 Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles (GB/T 14039-2002, ISO 4406: 1999, MOD)

GB/T 18849 Powered industrial trucks — Brake performance and component strength (GB/T 18849-2002, ISO 6292: 1996, EQV)

GB/T 26560 Powered industrial trucks — Safety signs and hazard pictorials — General principles (GB/T 26560-2011, ISO 15870: 2000, IDT)

GB/T 26561 Counterbalanced trucks handling freight containers of 6 m length and above — Additional stability tests (GB/T 26561-2011, ISO 10525: 1997, IDT)

JB/T 3300 Counterbalanced fork-lift trucks — Testing method for whole machines



3 Requirements



3.1 Basic requirements



3.1.1 The manufacturing requirements of the main structure of the handler (see Figure 1) shall meet those specified in Table 1.



3.1.2 The requirements of the main technical performance parameters of the handler shall meet those specified in Table 2.

Foreword i
1 Scope
2 Normative references
3 Requirements
4 Test method
5 Inspection rules
6 Marking, packaging, transportation and storage