This standard specifies the requirement, inspection method, inspection classification rules, marking, packing, transport and storage of trouser, tailored skirt, etc.
This standard is applicable to woolen garments like trouser and tailored skirt mainly made of shell fabric such as woolen, wool blended, interweaved and wool-like woven fabrics.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments (excluding amending error in the text) to, or revisions of, any of these publications do not be applied. However, the parties whose enter into agreement according to these specifications are encouraged to research whether the latest editions of these references are applied or not. For undated references, the latest edition of the normative document is applicable to this Standard.
GB/T 250 Textiles- Tests for colour fastness - Grey scale for assessing change in colour
GB/T 1335.1 Standard sizing systems for garments - Men
GB/T 1335.2 Standard sizing systems for garments - Women
GB/T 1335.3 Standard sizing systems for garments - Children
FZ/T 01048 Determination method for blending ratio of silk and cashmere blended textiles
FZ/T 01053 Textiles - Identification of fiber content
FZ/T 01057 (all parts) Test method for identification of textile fibres
FZ/T 80002 Marking, packaging, transporation and storage for garments
FZ/T 80004 Rule for garments delivery inspection
FZ/T 80007.3 Dry wash resistance test method for garments used adhesive interlining
3 Requirements
3.1 Instructions for use
Instructions for use of finished product shall comply with the requirements of GB 5296.4 and GB 18401.
3.2 Size specification
3.2.1 Sizing systems shall be selected according to the requirements GB/T 1335.1, GB/T 1335.2 and GB/T 1335.3.
3.2.2 The sizing of main parts on finished product may be design by self according to the relevant requirements of GB/T 1335.1, GB/T 1335.2, GB/T 1335.3 and GB/T 14304.
3.3 Materials
3.3.1 Shell fabric
Shell fabric of conformity to the quality requirement of this Standard shall be selected according to the national criteria for textile shell fabric.
3.3.2 Lining
Except in special design, the lining with property and color matching with shell fabric used shall be adopted.
3.3.3 Accessories
3.3.3.1 Lining fabric
Lining fabric of suitability to shell fabric used shall be adopted, and the dimensional change ratio hereof shall be suitable to shell fabric.
3.3.3.2 Suture
Suture of suitability to quality of accessories and linings used shall be adopted. Button thread shall be suitable to button in color; trademark thread shall be suitable to trademark ground colour (except ornamental thread).
3.3.3.3 Button and auxiliaries
Button (except ornamental button) and auxiliaries of suitability to shell fabric used shall be adopted. Buttons and auxiliaries shall be rustless, smooth, durable, and free of deformation and discolouring after washing and ironing.
Foreword 1 Scope 2 Normative References 3 Requirements 4 Inspection (test) Method 6 Marking, Packaging, Transportation and Storage Annex A (Normative) Test Methods for Skewing after Washing Annex B (Normative) Test Methods for Seam Slipping Degree Annex C (Normative) Sampling Location Schematic Diagram for Joint Strength Test of Seat Seam of Trousers
