1 Scope
This standard specifies the product classification, technical requirements, test methods, inspection rules, marking, labelling and operating instructions, and packaging, transportation and storage of vibration screen with cantilever mesh.
This standard is applicable to the vibration screen with cantilever mesh (hereinafter referred to as "cantilever screen"). This screen is mainly used for screening such bulk materials as sintered ore, coke, pellet and ore.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative documents applies.
GB/T 191 Packaging - Pictorial Marking for Handling of Goods (GB/T 191-2008, ISO 780:1997, MOD)
GB/T 699 Quality Carbon Structural Steels
GB/T 700 Carbon Structural Steels
GB/T 1222 Spring Steels
GB 5226.1 Electrical Safety of Machinery - Electrical Equipment of Machines - Part 1: General Requirements (GB 5226.1-2008, IEC 60204-1:2005, IDT)
GB/T 6388 Transport Package Shipping Mark
GB/T 9969 General Principles for Preparation of Instructions for Use of Industrial Products
GB/T 13306 Plates
GB/T 13384 General Specifications for Packing of Mechanical and Electrical Product
JB/T 4042 Test Methods of Vibrating Screens
JB/T 5000.3 Heavy Mechanical General Techniques And Standards - Part 3: And Standards Welding
JB/T 5000.4 Heavy Mechanical General Techniques and Standards - Part 4: Iron Casting
JB/T 5000.6 Heavy Mechanical General Techniques and Standards - Part 6: Steel Castings
JB/T 5000.12 Heavy Mechanical General Techniques and Standards - Part 12: Paint
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
cantilever mesh
mesh with rectangular screen hole, with the screen bar end fixed on beam and the cantilever set at the other end, see Figure 1
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Technical Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Labelling and Operating Instructions
9 Packaging, Transportation and Storage
