1 Scope
This Part of GB/T 223 specifies the determination of tellurium content in iron, steel and alloy with direct oscillopolarographic method and the sulfhydryl cotton fiber separation - oscillopolarographic method.
Direct oscillopolarographic method of this Part is applicable to the determination of tellurium content with mass fraction in pure iron, raw cast iron and low alloy steel; the sulfhydryl cotton fiber separation - oscillopolarographic method is applicable to the determination of tellurium content with mass fraction of 0.00004%~0.001% in raw cast iron, high, medium and low alloy steel and high temperature alloy.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this Part of GB/T 223. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 20066 Steel and Iron - Sampling and Preparation of Samples for the Determination of Chemical Composition
Contents
Foreword I
1 Scope
2 Normative References
3 Method I: Direct Oscillopolarographic Method
4 Method 2: Sulfhydryl Cotton Fiber Separation - Oscillopolarographic Method
10 Test Report
