1 Scope
This part specifies requirements for rechargeable energy storage system (REESS) of voltage class B propulsion circuit system of electrically propelled road vehicles for the protection of persons inside and outside the vehicle and the vehicle environment.
This part is applicable to electrically propelled road vehicles whose maximum working voltage of on-board propulsion system is voltageclass B. Electric motorcycles and electric mopeds may also refer to the provisions of this standard.
This part does is not applicable tovehicles not primarily intended as road vehicles, such as material handling trucks and forklifts.
This part does not provide comprehensive safety information for manufacturing, maintenance and repair personnel of electrically propelled road vehicles.This part excludes mechanical and electrical flywheel(vehicles).
2 Normative References
The following documents for the application of this document are essential. For any dated reference,just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB 2893 Safety Colors (GB 2893-2008, ISO 3864-1:2002, MOD)
GB 2894 Safety Signs and Guideline for the Use
GB/T 5465.2 Graphical Symbols for Use on Electrical Equipment-Part 2:Graphical Symbols(GB/T 5465.2-2008, IEC 60417 DB:2007,IDT)
GB/T 16935.1 Insulation Coordination for Equipment within Low-voltage Systems-Part 1: Principles Requirements and Tests(GB/T 16935.1-2008, IEC 60664-1:2007, IDT)
GB/T 19596 Terminology of Electric Vehicles (GB/T 19596-2004,ISO 8713:2002, NEQ)
3 Terminologies and Definitions
Foreword I
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Marking and Identification
5 Requirements
