This standard specifies the emission limits, monitoring and supervision requirements of water and air pollutants from ferroalloy production enterprises or production facilities, and relevant requirements on implementation and supervision of standards.
This standard is applicable to the emission management of the water and air pollutants from electric process ferroalloy production enterprises or production facilities, the environmental impact assessment of construction project of electric process ferroalloy smelt industry, environment protection facilities design, completion environmental protection acceptance and the water and air pollutants emission management after production.
This standard is applicable to legal pollutant emission behaviors. The site selection of the pollution source set newly and the management of the current pollution source in the special protection zone shall comply with the relevant regulations in such laws, regulations and rules as "Law on Prevention of Air Pollution of the People's Republic of China", "Law of the People's Republic of China on Prevention and Control of Water Pollution" , "Marine Environment Protection Law of the People's Republic of China" ,"Law of the People's Republic of China on Prevention of Environmental Pollution Caused by Solid Waste" and " Law of Environmental Impact Assessment of the People's Republic of China".
The emission control requirements of water pollutants specified in this standard are applicable to the behavior that the enterprises directly or indirectly discharge water pollutants out of their legal boundaries.
1 Application Scope
2 Normative References
3 Terms and Definitions
4 Pollutant Emission Control Requirements
5 Pollutant Monitoring Requirements
6 Implementation and Supervision
