1 Scope
This part of GB 18100 specifies the general and specific provisions for the installation of lighting and light-signaling devices for Category L1 two wheels motorcycle.
This part applies to two wheels moped (hereinafter referred to as "vehicle").
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this part of GB 18100. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB 4599 Motor Vehicle Headlamps Equipped With Filament Lamps
GB 4785 Prescription for Installation of the External Lighting and Light-Signaling Devices for Motor Vehicles and Their Trailers
GB 5948 Photometric Characteristics of Motorcycle Headlamps Equipped with Filament Light Sources
GB 11564 Retro Reflector for Motor Vehicles
GB 17509 Photometric Characteristics of Rear Fog Lamps for Motor Vehicles and Their Trailers
GB 17510 Photometric Characteristics of Light-signaling Devices for Motorcycles
GB 19152 Photometric Characteristics of Moped Headlamps
3 Terms and Definitions
For the purpose of this part, the terms and definitions specified in GB 4785 apply.
4 Specifications
1 Scope
2 Normative References
3 Terms and Definitions
4 Specifications
5 Individual Specifications
6 Test Rules
Appendix A (Normative) Forward Visibility of Red Lights and Rearward Visibility of White Lights
