1 Scope
This standard is applicable to the safety requirements and test methods for baby walking frames into which a baby is placed (hereinafter referred to as "baby walking frames"), and intended to be used from when the baby is able to sit up by itself until the baby is able to walk by itself.
This standard is not applicable to the baby walking frames for therapeutic and curative purposes and to those baby walking frames relying on inflatable parts to support the baby.
In case the baby walking frames are equipped with the toys for children to play, then the baby walking frames shall meet the requirements of the relevant standards.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document is applicable to this standard.
GB 6675-2003 "National Safety Technical Code for Toys"
3 Terms and Definitions
For the purpose of this standard, the following terms and definitions apply.
3.1
Baby walking frames
The seat frame in capable of operating on castors, in which a child is placed in a sitting position, which allows a baby to move around with the aid of the support offered by the frame. For example: X-shaped frame, round frame, folding type frame, adjustable elastic frame and other structure forms (see Figure 1).
Contents
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
4.1 Materials
4.2 Metal Surface
4.3 Structure
4.4 Static Stability
4.5 Dynamic Stability
4.6 Static Strength
4.7 Dynamic Strength
4.8 Collision Strength
4.9 Flammability
4.10 Plastic Bags or Films for Packaging or on Baby Walking Frame
4.11 Marking of Product and Instructions for Use
5 Test Methods
5.1 General Requirements
5.2 Test Masses
5.3 Test of Specific Transportable Elements (See 4.1.2)
5.4 Touchable Gap Test (See 4.3.2 and 4.3.8)
5.5 Test of Small Parts, the Shapes, Dimensions and Strength of Some Specific Toys, the Edges, sharp Tip, Metal Wires and Member Bars (See 4.3.5)
5.6 Test of Locking, Folding and Frame Adjusting Mechanisms (See 4.3.7)
5.7 Measurement of Seat Height (See 4.3.10)
5.8 Anti-collision Space Test (See 4.3.13)
5.9 Static Stability Test (see 4.4)
5.10 Dynamic Stability Test (See 4.5)
5.11 Static Strength Test (See 4.6)
5.12 Dynamic Strength Test (See 4.7)
5.13 Crash Test (See 4.8)
