1 Scope
This standard specifies technical requirements, test methods, inspection rules, packaging, marking and other technical features for low wool content and wool like knitting goods.
This standard is applicable to quality identification for low wool content knitting goods with wool content below 30% and non wool fiber pure knitting goods or blended wool like knitting goods.
2 Normative Reference
The following referenced documents are indispensable for the application of this document. For dated reference, subsequent amendments (excluding corrigendum content) to, or revisions of, any of these publications do not apply. However, parties that enter into an agreement according to this standard are encouraged to study whether the latest edition of these documents can be used. For undated references, the latest editions of the normative documents are applicable to this standard.
GB/T 2910 Textile--Binary fiber mixtures--Quantitative chemical analysis (GB/T 2910-1997, eqv ISO 1833: 1977)
GB/T 2911 Textiles--Ternary fiber mixtures--Quantitative analysis (GB/T 2911-1997, eqv ISO 5088: 1976)
GB/T 3920 Textiles--Tests for color fastness--Color fastness to rubbing (GB/T 3920-1995, eqv ISO 105-X12: 1993)
GB/T 1922 Textiles--Testing method for color fastness to perspiration (GB/T 3922-1995, eqv ISO 105/E04: 1994)
GB/T 4802.3 Textiles--Assessing the rate of pilling of fabrics-Pilling box method
GB/T 5713 Textiles--Tests for color fastness--Color fastness to water (GB/T 5713-1997, eqv ISO 105-E01: 1994)
GB/T 8170 "Rules for Rounding off of Numberical Values"
GB/T 8427-1998 Textiles-Tests for color fastness-Color fastness to artificial light: Xenon arc fading lamp test (eqv ISO 105-B02:1994)
GB 9994 Conventional moisture regains of textiles
GB/T 12490-1990 Textiles--Testing method for color fastness to domestic and commercial laundering (neq ISO: 105/C06: 1987)
GB/T 16988 Quantitative determination for mixtures of special animal fiber and wool
FZ/T 01026 Quantitative chemical analysis for quaternary fiber mixtures
FZ/T 70009 Method for determination of relaxation and felting shrinkage of wool textiles after machine washing
FZ/T 73018-2002 Wool knitting goods
3 Technical Requirements
Technical requirements include safety requirements, grading requirements and grading for inherent quality and appearance quality.
3.1 Safety requirements
Safety of low wool content and wool like knitting goods shall meet the requirements of relevant compulsory national standard.
3.2 Grading requirements
The quality grade of low wool content and wool like knitting goods takes piece as a unit; and be comprehensively evaluated according to the inspection results of inherent quality and appearance quality and shall be graded by the lowest item of them. Low wool content and wool like knitting goods are divided into first-grade product and second-grade product; products below second grade shall be graded as substandard product.
3.3 Inherent quality grading
3.3.1 Inherent quality grading shall take lot as unit (each delivery unit of the same product is a lot).
3.3.2 Inherent quality grading depends on overall assessment of physical index and color fastness; and shall be graded by the lowest item of them.
3.3.3 Physical index shall be graded according to those specified in Table 1.
Foreword I
1 Scope
2 Normative Reference
3 Technical Requirements
4 Test Methods
5 Inspection Rules
6 Packaging, Marking
Appendix A (Normative) Several items of supplementary provisions
