1 Scope
This standard specifies the control, monitoring and testing of air pollutant emission for the wooden furniture manufacturing industry as well as the requirements on the implementation and supervision of this standard.
This standard is applicable to the air pollutant emission management of existing wooden furniture manufacturers as well as the environmental impact assessment, environment protection facility design, completion environmental protection acceptance and post-commissioning air pollutant emission management of the construction project of constructed, renovated or extended wooden furniture production line construction projects.
This standard is also applicable to the air pollutant emission management of manufacturers of wooden doors, windows, floors and wooden product containers.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 3186 Paints, Varnishes and Raw Materials for Paints and Varnishes - Sampling
GB/T 4754-2011 Industrial Classification and Code for National Economic Activities
GB/T 15432 Ambient Air - Determination of Total Suspended Particulates - Gravimetric Method
GB/T 16157 The Determination of Particulates and Sampling Methods of Gaseous Pollutants Emitted from Exhaust Gas of Stationary Source
GB 23985 Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Difference Method
GB 23986-2009 Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Gas-chromatographic Method
HJ/T 38 Stationary Source Emission - Determination of Nonmethane Hydrocarbons - Gas Chromatography
HJ/T 55 Technical Guidelines for Fugitive Emission Monitoring of Air Pollutants
HJ/T 373 Technical Specifications of Quality Assurance and Quality Control for Monitoring of Stationary Pollution Source (On Trial)
HJ/T 397 Technical Specifications for Emission Monitoring of Stationary Source
HJ 583 Ambient Air - Determination of Benzene and Its Analogies Using Sorbent Adsorption Thermal Desorption and Gas Chromatography
HJ 584 Ambient Air - Determination of Benzene and Its Analogies by Activated Charcoal Adsorption Carbon Disulfide Desorption and Gas Chromatograph
HJ 732 Emission from Stationary Sources - Sampling of Volatile Organic Compounds - Bags Method
HJ 734 Stationary Source Emission - Determination of Volatile Organic Compounds - Sorbent Adsorption and Thermal Desorption Gas Chromatography Mass Spectrometry Method
DB 11/1195 Technical Specification for the Positioning of Stationary Source Monitoring Spots
3 Terms and Definitions
For the purposes of this document, the terms and definitions specified in GB/4754-2011 as well as those listed below apply.
3.1
Foreword I
Introduction II
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements for Air Pollutants Emission Control
5 Monitoring and Testing
6 Implementation and Supervision
