1 Scope
This standard specifies hot work classification, safety and fire protection requirements, hot work analysis and acceptance criteria, responsibilities and management of Hot Work Permit for hot work in chemical manufactory.
This standard is applicable to hot work in fire-forbidden zone of chemical manufactory.
This standard is not applicable to operation at fixed hot work zone and fixed hot work in the chemical manufactory.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, all parties coming to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB 50016 Code of Design on Building Fire Protection and Prevention
AQ 3028-2008 Safety Code for Operation at Confined Space in Chemical Manufactory
AQ 3025-2008 Safety Code for Work at Height in Chemical Manufactory
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Hot Work Classification
5 Safety and Fire Protection Requirements for Hot Work
6 Hot Work Analysis and Acceptance Criteria
7 Responsibilities
8 Management of Hot Work Permit
Annex A (Informative) Hot Work Permit
