GB/T 45132-2025 Tires intelligent manufacturing — Interconnection network architecture — General specification
1 Scope
This document specifies the terms and definitions, abbreviations, requirements and connection framework, network architecture, network implementation and network security requirements of interconnection network for tires intelligent manufacturing.
This document is applicable to the design, construction and upgrade of interconnection network architecture for tire intelligent manufacturing enterprises.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 22239-2019 Information security technology - Baseline for classified protection of information system security;
GB 40050-2021 Critical network devices security common requirements
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
network architecture
overall design of a communication system that provides standards for network hardware, software, protocols, access control, and topology
3.2
field level
the lowest part of the decentralized control system, it is also the most basic level
Note: It includes production equipment, instrumentation, etc.
3.3
workshop level
relative functionally independent unit in the production process
Note: In the tire industry mainly refers to rubber mixing workshop, semi-product workshop, molding workshop, vulcanization workshop, testing workshop, etc., each production enterprise will be different according to the actual situation.
3.4
plant level
the whole factory of tire enterprise
Note: It includes design, production, logistics, management and other links.
3.5
network topology
physical layout of various devices interconnected by the transmission medium, which constitutes a specific physical, that is, real, or logical, that is, virtual arrangement among the members of the network
4 Abbreviations
For the purposes of this document, the following abbreviations apply.
AGV: Automated Guided Vehicle
API: Application Programming Interface
CC-Link: Control &Communication Link
CRM: Customer Relationship Management
DCS: Distributed Control System
ERP: Enterprise Resource Planning
FCS: Fieldbus Control System
HMI: Human Machine Interface
IPv4: Internet Protocol Version 4
IPv6: Internet Protocol Version 6
IT: Information Technology
K8s: Kubernetes
MES: Manufacturing Execution System
MODBUS RTU: Modbus Protocol Remote Terminal Unit
Modbus: Modbus Protocol
MPLS: Multi-Protocol Label Switching
MQ: Message Queuing
MQTT: Message Queuing Telemetry Transport
NB-IoT: Narrow Band Internet of Things
Netconf: Network Configuration Protocol
OA: Office Automation
OPC: OLE for Process Control
OPC UA: OLE for Process Control Unified Architecture
OT: Operational Technology
PLC: Programmable Logic Controller
PLM: Product Lifecycle Management
PON: Passive Optical Network
RFID: Radio Frequency Identification
SCADA: Supervisory Control And Data Acquisition
SCM: Supply Chain Management
SDN: Software Defined Network
SD-Wan: Software-Defined WAN
SNMP: Simple Network Management Protocol
SRM: Supplier Relationship Management
Contents
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Tire factory interconnection network requirements and connection framework
5.1 Overall requirements for tire factory interconnection network
5.2 Interconnection network connection framework for tires intelligent manufacturing
6 Interconnection network architecture for tires intelligent manufacturing
6.1 Classification of tire factory interconnection network architecture
6.2 Target architecture
6.3 Topology
6.4 Functional requirements
7 Implementation of interconnection network for tires intelligent manufacturing
7.1 Implementation framework
7.2 Implementation of edge access network
7.3 Implementation of production control network
7.4 Implementation of backbone network of tire factory
7.5 Implementation of data communication system
8 Interconnection network security for tires intelligent manufacturing
8.1 Requirements for device security protection
8.2 Requirements for network security protection
8.3 Requirements for device access control security
8.4 Requirements for data security
轮胎智能制造 互联网络架构 通用规范
1 范围
本文件规定了轮胎智能制造互联网络的术语和定义、缩略语、需求及连接框架、网络架构、网络实施和网络安全的要求。
本文件适用于轮胎企业智能制造互联网络架构设计、建设及升级。
2 规范性引用文件
下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件，仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本(包括所有的修改单)适用于本文件。
GB/T 22239-2019 信息安全技术 网络安全等级保护基本要求
GB 40050-2021 网络关键设备安全通用要求
3 术语和定义
下列术语和定义适用于本文件。
3.1
网络架构 network architecture
通信系统的整体设计，为网络硬件、软件、协议、存取控制和拓扑提供标准。
3.2
现场级 field level
分散控制系统最底层的部分，也是最基础的一个层次。
注：包括生产设备、仪器仪表等。
3.3
车间级 workshop level
生产过程中功能相对独立的单元。
注：在轮胎行业主要指炼胶车间、半制品车间、成型车间、硫化车间、检测车间等，各生产企业根据实际情况会有不同。
3.4
工厂级 plant level
轮胎企业整个工厂。
注：包括设计、生产、物流、管理等环节。
3.5
网络拓扑 network topology
用传输介质互连各种设备的物理布局，构成网络的成员间特定的物理的即真实的，或者逻辑的即虚拟的排列方式。
4 缩略语
下列缩略语适用于本文件。
AGV：自动导引运输车(Automated Guided Vehicle)
API：应用程序编程接口(Application Programming Interface)
CC-Link：控制与通信链路系统(Control &Communication Link)
CRM：客户关系管理(Customer Relationship Management)
DCS：分散控制系统(Distributed Control System)
ERP：企业资源计划(Enterprise Resource Planning)
FCS：现场总线控制系统(Fieldbus Control System)
HMI：人机界面接口(Human Machine Interface)
IPv4：互联网协议第四版(Internet Protocol Version 4)
IPv6：互联网协议第六版(Internet Protocol Version 6)
IT：信息技术(Information Technology)
K8s：容器编排引擎(Kubernetes)
MES：制造执行系统(Manufacturing Execution System)
MODBUS RTU：串行通信协议-远程终端控制系统(Modbus Protocol Remote Terminal Unit)
Modbus：串行通信协议(Modbus Protocol)
MPLS：多协议标签交换(Multi-Protocol Label Switching)
MQ：消息队列(Message Queuing)
MQTT：消息队列遥测传输(Message Queuing Telemetry Transport)
NB-IoT：窄带物联网(Narrow Band Internet of Things)
Netconf：网络配置协议(Network Configuration Protocol)
OA：办公自动化(Office Automation)
OPC：用于过程控制的工业标准协议(OLE for Process Control)
OPC UA：开放平台通信统一架构(OLE for Process Control Unified Architecture)
OT：操作技术(Operational Technology)
PLC：可编程逻辑控制器(Programmable Logic Controller)
PLM：产品生命周期管理(Product Lifecycle Management)
PON：无源光纤网络(Passive Optical Network)
RFID：射频识别(Radio Frequency Identification)
SCADA：数据采集与监视控制(Supervisory Control And Data Acquisition)
SCM：供应链管理(Supply Chain Management)
SDN：软件定义网络(Software Defined Network)
SD-Wan：软件定义广域网(Software-Defined WAN)
SNMP：简单网络管理协议(Simple Network Management Protocol)
SRM：供应商关系管理(Supplier Relationship Management)
TCP：传输控制协议(Transmission Control Protocol)
TSN：时间敏感网络(Time-Sensitive Networking)
UDP：用户数据报协议(User Datagram Protocol)
VxLAN：虚拟扩展局域网(Virtual Extensible Local Area Network)
WebAPI：网络应用程序接口(Website Application Programming Interface)
WIA：工业无线网络协议(Wireless Networks for Industrial Automation)
Wi-Fi：无线保真(Wireless Fidelity)
WMS：仓储管理系统(Warehouse Management System)
