This standard specifies the designation method, structural type, technical requirements, test methods, inspection rules, marking and rust proof packaging of the ball bearings for passenger car manual transmission (hereinafter referred to as "bearings").
This standard is applicable to the production, inspection and acceptance of bearings.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 272-1993 Rolling Bearing-Identification Code
GB/T 307.1-2005 Rolling Bearings - Radial Bearings - Tolerances (ISO 492: 2002, MOD)
GB/T 307.2-2005 Rolling Bearings - Measuring and Gauging Principles and Methods (ISO 1132-2: 2001, MOD)
GB/T 307.3-2005 Rolling Bearings - General Technical Regulations
GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributes – Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO 2859-1:1999; IDT)
GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Applicable to Inspection of Stability for Productive Process)
GB/T 4199-2003 Rolling Bearings - Tolerances - Definitions (ISO 1132-1: 2000, MOD)
GB/T 4604-2006 Rolling Bearings - Radial Internal Clearance (ISO 5753:1991, MOD)
GB/T 6930-2002 Rolling Bearings - Vocabulary (ISO 5593: 1997, IDT)
GB/T 7811-2007 Rolling Bearings - Symbols for Quantities (ISO 15241: 2001, IDT)
GB/T 8597-2003 Rolling Bearings-Rust Proof Packaging
