标准编号:	FZ/T 60047-2022
中文名称:	服装衬布水洗尺寸变化试验方法
英文名称:	Testing method for dimensional change of garment interlinings after washing
行业分类:	FZ    纺织行业标准
发布机构:	中华人民共和国工业和信息化部
发布日期:	2022-04-08
实施日期:	2022-10-1
标准状态:	valid
翻译语言:	英文
文件格式:	PDF

Testing method for dimensional change of garment interlinings after washing 1 Scope This document specifies the testing method for dimensional change of garment interlinings after washing. This document is applicable to garment interlinings whose base cloth is made of woven fabrics, knitted fabrics and non-woven fabrics. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB/T 6529 Textiles - Standard atmospheres for conditioning and testing GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values GB/T 8629-2017 Textiles - Domestic washing and drying procedures for textile testing GB/T 19022 Measurement management systems - Requirements for measurement processes and measuring equipment FZ/T 01076 Making method for composite specimen of fusible interlinings 3 Terms and definitions No terms and definitions are listed in this document. 4 Principle The garment interlinings are washed and dried by specified treatment procedure to test the degree of dimensional change after washing. ..... Foreword This document is developed in accordance with the rules given in GB/T 1.1-2020 Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights. This document was proposed by the China National Textile and Apparel Council. This document is under the jurisdiction of SAC/TC 209/SC 10 Subcommittee on Cotton Textiles of the National Technical Committee on Textiles of Standardization Administration of China.

Foreword I 1 Scope 2 Normative references 3 Terms and definitions 4 Principle 5 Instruments and apparatus 6 Specimen preparation 7 Procedures 8 Calculation 9 Test report

ICS 59.080.01 CCS W 10 中华人民共和纺织行业标准 FZ/T 60047-2022 服装衬布水洗尺寸变化试验方法 Testing method for dimensional change of garment interlinings after washing 2022-04-08发布 2022-10-01实施 中华人民共和国工业和信息化部 发布 中国标准出版社 出版 目次 前言 i 1 范围 1 2 规范性引用文件 1 3 术语和定义 1 4 原理 1 5 设备和用具 3 6 试样准备 3 7 操作程序 3 8 结果计算 3 9 试验报告 3 前言 本文件按照GB/T 1.1-2020《标准化工作导则 第1部分:标准化文件的结构和起草规则》的规定起草。 请注意本文件的某些内容可能涉及专利.本文件的发布机构不承担识别专利的责任。 本文件由中国纺织工业联合会提出。 本文件由全国纺织品标准化技术委员会棉纺织品分技术委员会（SAC/TC 2O9/SC 10）归口。 服装衬布水洗尺寸变化试验方法 1 范围 本文件规定了服装衬布经水洗后尺寸变化的试验方法. 本文件适用于机织物、针织物、非织造布为基布的服装衬布。 2 规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文 件，仅该日期对应的版本适用于本文件;不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。 GB/T 6529 纺织品调湿和试验用标准大气 GB/T 8170 数值修约规则与极限数值的表示和判定 GB/T 8629-2017 纺织品试验用家庭洗涤和干燥程序 GB/T 19022 测量管理体系测量过程和测量设备的要求 FZ/T 01076 粘合衬组合试样制作方法 3 术语和定义 本文件没有需要界定的术语和定义。 4 原理 服装衬布经规定的处理程序水洗、干燥后，测试水洗尺寸变化的程度。