The Rule is applicable to fire protection products which include the following categories: fire-proof coating, fire-proof plugging material, fire-proof cable tray, fire window, fire door, fire-proof glass, fire-proof shutter, fire-proof smoke exhaust damper, fire-fighting smoke exhaust fan and ceiling screen.
0 Introduction
1 Application Scope
2 Certification Standards
3 Certification Mode
4 Certification Unit Division
5 Certification Entrustment
5.1 Proposal and Acceptance of Certification Entrustment
5.2 Application Information
5.3 Implementation Arrangement
6 Certification Implementation
6.1 Enterprise’s Quality Assurance Capacity and Product Consistency Inspection (Initial Factory Inspection)
6.2 Type Test
6.3 Certification Evaluation and Decision
6.4 Certification Time Limit
7 Post-certification Supervision
7.1 Sampling Test or Inspection in Post-Certification Application Field
7.2 Post-certification Follow-up Inspection
7.3 Post-certification Sampling Test or Inspection on Production Site
7.4 Frequency and Time of Post-certification Supervision
7.5 Record of Post-certification Supervision
7.6 Assessment of Post-certification Supervision Result
8 Certificate
8.1 Certificate Validity
8.2 Certificate Content
8.3 Alteration / Extension of Certificate
8.4 Cancellation, Suspension and Revocation of Certificate
8.5 Application of Certificate
9 Certification Mark
9.1 Pattern
9.2 Application Requirements
10 Charge
11 Certification Responsibility
12 Certification Implementation Rules
Attachment Unit Division and Standards for Compulsory Certification of Fire Protection Products
