CNCA-C12-01:2015 Rules for the Implementation of Compulsory Product Certification - Tyres for Motor Vehicles English
0 Introduction
The Rules is prepared based on safety risks and certification risks of tyres for motor vehicles and specifies the basic principles and requirements for implementing compulsory product certification on tyres for motor vehicles.
The Rules shall be used together with the general implementation rules issued by the Certification and Accreditation Administration of the Republic of China (CNCA), e.g., Rules for the Implementation of Compulsory Product Certification - Manufacturing Enterprise Classification Management, Certification Mode Selection and Determination, Rules for the Implementation of Compulsory Product Certification - Utilization of Testing Resources and Other Certification Results of Manufacturing Enterprises and Rules for the Implementation of Compulsory Product Certification - General Requirements for Factory Inspection.
The certification authority shall formulate the detailed rules for the implementation of certification in accordance with the requirements of general implementation rules and the Rules, and shall implement these detailed rules together with the general implementation rules and the Rules.
The certification client shall be able to assume the relevant quality and legal liabilities such as recall and three guarantees.
Manufacturing enterprises or importers shall ensure that the certified products they manufacture or import continuously meet the requirements of certification and applicable standards.
The compulsory product certification activities implemented in ODM mode shall also meet the relevant requirements of the Rules for the Implementation of Compulsory Product Certification - Supplementary Provisions in case of ODM Mode Involved.
1 Application Scope
The Rules is applicable to the new pneumatic tyres for motor vehicles, including passenger car tyre, truck tyre, and motorcycle tyre and originally aims to the tyres for motor vehicles of M, N, O, and L categories (see GB/T 15089 for definitions of vehicle category).
The Rules is not applicable to retreaded tyres and those designed specifically for competition.
The adjustment of application scope caused by the changes of laws, regulations, relevant product standards, technologies, industrial policies and other factors shall be subject to the announcement issued by CNCA.
2 Terms and Definitions
For the purpose of the Rules, the terms and definitions in laws and regulations related to compulsory product certification apply.
0 Introduction
1 Application Scope
2 Terms and Definitions
3 Certification Basis
3.1 Certification Standards
3.2 Requirements in case of Certification Standard Changes
4 Certification Mode
5 Certification Unit Division
6 Certification Entrustment
6.1 Proposal and Acceptance of Certification Entrustment
6.2 Application Data
6.3 Implementation Arrangement
7 Certification Implementation
7.1 Type Test
7.2 Initial Factory Inspection
7.3 Certification Evaluation and Decision
7.4 Time Limit of Certification
8 Post-certification Supervision
8.1 Post-certification Follow-up Inspection
8.2 Sample Testing or Inspection on Production Site
8.3 Market Sampling Testing or Inspection
8.4 Frequency of Post-certification Supervision
8.5 Post-certification Supervision Record
8.6 Evaluation of Post-certification Supervision Result
9 Certificate
9.1 Certificate Validity
9.2 Certificate Content
9.3 Certificate Alteration
9.4 Suspension, Cancellation and Revocation of Certificate
9.5 Use of Certificate
10 Certification Mark
10.1 Mark Form
10.2 Requirements for Use
11 Certification Responsibilities
12 Detailed Rules for the Implementation of Certification
Annex 1: Compulsory Certification Unit Division of the Tyres Products for Motor Vehicles
Annex 2: Technical Parameter Table of the Tyres Products for Motor Vehicles
Annex 3: Production Conformity Inspection Requirements
Annex 4: Type Test Items and Methods of the Tyres Products for Motor Vehicles
