GB/T 26949.15-2025 Industrial trucks - Verification of stability - Part 15: Counterbalanced trucks with articulated steering
1 Scope
This document specifies the tests for verifying the stability of counterbalanced fork-lift trucks with articulating steering and with mast, equipped with fork arms or load-handling attachments.
It is not applicable to trucks with retractable devices such as a retractable mast or fork.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 5053-1 Industrial trucks - Vocabulary - Part 1: Types of industrial trucks
Note: GB/T 6104.1-2018, Industrial trucks - Terminology and classification-Part 1: Types of industrial trucks (ISO 5053-1:2015, IDT)
ISO 22915-1 Industrial trucks - Verification of stability - Part 1: General
Note: GB/T 26949.1-2020, Industrial trucks - Verification of stability - Part 1: General (ISO 22915-1:2016, IDT)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5053-1 and ISO 22915-1 apply.
4 Test conditions
4.1 General
See ISO 22915-1.
4.2 Position of truck on the tilt table
4.2.1 Load and rear axles
Contents
Foreword I
Introduction IV
1 Scope
2 Normative references
3 Terms and definitions
4 Test conditions
5 Verification of stability
